Displayed currency: USD
Price display: excl. VAT

  2. Publishers
  3. Technical standards ASTM
  4. Standard "ASTM A1031/A1031M-12"
WITHDRAWN ASTM A1031/A1031M-12 1.5.2012 preview

Additional information

ASTM A1031/A1031M-12

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled



STANDARD published on 1.5.2012


Language
Format
AvailabilityIN STOCK
Price73.00 USD excl. VAT
73.00 USD

The information about the standard:

Designation standards: ASTM A1031/A1031M-12
Note: WITHDRAWN
Publication date standards: 1.5.2012
SKU: NS-1141
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Print
Send to a colleague
Query

The category - similar standards:

Flat steel products and semi-products

Annotation of standard text ASTM A1031/A1031M-12 :

Keywords:

alloy steel sheet, alloy steel strip, alloy structural steel, drawing steel, heavy-thickness coils, hot-rolled alloy steel, Drawing steel (DS) sheet/strip--specifications, Heavy-thickness steel coils--specifications, Hot-rolled steel sheet/strip--specifications, Steel sheet/strip--structural, ICS Number Code 77.140.50 (Flat steel products and semi-products)

Additional information

 
1. Scope

1.1 This specification covers hot-rolled, heavy thickness coils beyond the size limits of Specifications A506 and A507.

1.2 The product is available in three designations: Alloy Steel, Drawing Steel, and Structural Alloy Steel.

1.3 Alloy steel is furnished to chemical composition requirements and is intended primarily for general or miscellaneous use where bending and moderate forming is a requirement.

1.4 Drawing steel is produced principally for applications involving severe cold plastic deformation such as deep drawn or severely formed parts.

1.4.1 Drawing steel may be furnished in several conditions, heat treatments, surface finishes, and edges, as specified herein.

1.5 Structural steel is furnished to chemical composition requirements and to specific mechanical property requirements which may include tension tests, hardness tests, or other commonly accepted mechanical tests.

1.5.1 The formability of structural steel decreases with increasing yield strength or hardness. Therefore, product design in relation to the mechanical properties of the grade used must be considered.

1.6 This material is available only in coils described as follows:

Product

Size Limits, Coils Only

Width, in. [mm]

Thickness, in. [mm]

Strip

Over 8 to 12, incl

0.230 to 1.000, incl

[Over 200 to 300]

[Over 6.0 to 25]

Sheet

Over 12

0.230 to 1.000, incl

[Over 300]

[from 6.0 through 25]

1.7 Sheet and strip in coils of sizes noted in 1.6 are covered by this specification only with the following provisions:

1.7.1 The material is not to be converted into steel plates for structural or pressure vessel use unless tested in complete accordance with the appropriate sections of Specifications A6/A6M (plates provided from coils) or A20/A20M (plates produced from coils). A plate produced in this manner is no longer governed by this sheet steel specification and since this material is now plate, the appropriate plate standard must now apply.

1.7.2 The dimensional tolerances of Specification A635/A635M are applicable to material produced to this specification.

1.7.3 The material is to be fed directly from coils into a blanking press, drawing or forming operation, tube mill, rolling mill, or sheared or slit into blanks for subsequent drawing or forming.

1.8 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.8.1 Within the text the SI units are shown in brackets.

TABLE 1 Standard Steels Commonly Produced for Alloy Steel Sheet and Strip

Steel
Designation
No.		 Chemical Composition Ranges and Limits, % (Heat Analysis)A
C Mn P S SiB Ni Cr Mo V

E3310C

0.08-0.13

0.45-0.60

0.025

0.025

0.15-0.30

3.25-3.75

1.40-1.75

. . .

. . .

4012C

0.09-0.14

0.75-1.00

0.025

0.025

0.15-0.30

. . .

. . .

0.15-0.25

. . .

4118

0.18-0.23

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.40-0.60

0.08-0.15

. . .

4130

0.28–0.33

0.40–0.60

0.025

0.025

0.15-0.30

. . .

0.80–1.10

015–0.25

. . .

4135

0.33-0.38

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4137

0.35-0.40

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4140

0.38–0.43

0.75–1.00

0.025

0.025

0.15-0.30

. . .

0.80–1.10

0.15-0.25

. . .

4142

0.40-0.45

0.75-1.00

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4145

0.43-0.48

0.75-1.00

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4147C

0.45-0.50

0.75-1.00

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4150

0.48-0.53

0.75-1.00

0.025

0.025

0.15-0.30

. . .

0.80-1.10

0.15-0.25

. . .

4320

0.17-0.22

0.45-0.65

0.025

0.025

0.15-0.30

1.65-2.00

0.40-0.60

0.20-0.30

. . .

4340

0.38–0.43

0.60–0.80

0.025

0.025

0.15-0.30

1.65-2.00

0.70–0.90

0.20-0.30

. . .

E4340

0.38-0.43

0.65-0.85

0.025

0.025

0.15-0.30

1.65-2.00

0.70-0.90

0.20-0.30

. . .

4520C

0.18-0.23

0.45-0.65

0.025

0.025

0.15-0.30

. . .

. . .

0.45-0.60

. . .

4615

0.13-0.18

0.45-0.65

0.025

0.025

0.15-0.30

1.65-2.00

. . .

0.20-0.30

. . .

4620

0.17-0.22

0.45-0.65

0.025

0.025

0.15-0.30

1.65-2.00

. . .

0.20-0.30

. . .

4718

0.16-0.21

0.70-0.90

0.025

0.025

0.15-0.30

0.90-1.20

0.35-0.55

0.30-0.40

. . .

4815

0.13-0.18

0.40-0.60

0.025

0.025

0.15-0.30

3.25-3.75

. . .

0.20-0.30

. . .

4820

0.18-0.23

0.50-0.70

0.025

0.025

0.15-0.30

3.25-3.75

. . .

0.20-0.30

. . .

5015

0.12-0.17

0.30-0.50

0.025

0.025

0.15-0.30

. . .

0.30-0.50

. . .

. . .

5046

0.43-0.50

0.75-1.00

0.025

0.025

0.15-0.30

. . .

0.20-0.35

. . .

. . .

5115

0.13-0.18

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.70-0.90

. . .

. . .

5120

0.17–0.22

0.70–0.90

0.025

0.025

0.15-0.30

. . .

0.70–0.90

. . .

. . .

5130

0.28–0.33

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.80-1.10

. . .

. . .

5132

0.30–0.35

0.60-0.80

0.025

0.025

0.15-0.30

. . .

0.75-1.00

. . .

. . .

5140

0.38–0.43

0.70–0.90

0.025

0.025

0.15-0.30

. . .

0.70–0.90

. . .

. . .

5150

0.48–0.53

0.70–0.90

0.025

0.025

0.15-0.30

. . .

0.70–0.90

. . .

. . .

5160

0.56–0.64

0.75–1.00

0.025

0.025

0.15-0.30

. . .

0.70–0.90

. . .

. . .

E51100C

0.95–1.10

0.25-0.45

0.025

0.025

0.15-0.30

. . .

0.90-1.15

. . .

. . .

E52100

0.98–1.10

0.25-0.45

0.025

0.025

0.15-0.30

. . .

1.30-1.60

. . .

. . .

6150

0.48–0.53

0.70-0.90

0.025

0.025

0.15-0.30

. . .

0.80-1.10

. . .

0.15 min

6158C

0.55–0.62

0.70–1.10

0.025

0.025

0.15-0.30

. . .

0.90–1.20

. . .

0.10–0.20

8615

0.13–0.18

0.70–0.90

0.025

0.025

0.15-0.30

0.40–0.70

0.40–0.60

0.15–0.25

. . .

8617

0.15–0.20

0.70-0.90

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8620

0.18–0.23

0.70–0.90

0.035

0.035

0.15-0.30

0.40-0.70

0.40–0.60

0.15–.025

. . .

8630

0.28–0.33

0.70-0.90

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8640

0.38–0.43

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8642C

0.40-0.45

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8645

0.43-0.48

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8650C

0.48-0.53

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8655

0.501-0.59

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8660

0.55-0.65

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.15-0.25

. . .

8720

0.18-0.23

0.70-0.90

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.20-0.30

. . .

8735C

0.33-0.38

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.20-0.30

. . .

8740C

0.38-0.43

0.75-1.00

0.025

0.025

0.15-0.30

0.40-0.70

0.40-0.60

0.20-0.30

. . .

9260

0.56-0.64

0.75-1.00

0.025

0.025

1.80-2.20

. . .

. . .

. . .

. . .

9262C

0.55-0.65

0.75-1.00

0.025

0.025

1.80-2.20

. .

0.25-0.40

. . .

. . .

E9310C

0.08-0.13

0.45-0.65

0.025

0.025

0.20-0.35

3.30-35.0

1.00-1.40

0.08-0.15

. . .

A The chemical ranges and limits shown are subject to product analysis tolerances. See Specification A505.

B Other silicon ranges are available. Consult the producer.

C Not an SAE Steel Designation.
 
2. Referenced Documents

A506-16(2021)

Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A6/A6M-23

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A505-16(2021)

Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A635/A635M-22

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

A370-23

Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A507-16(2021)

Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

A20/A20M-20

Standard Specification for General Requirements for Steel Plates for Pressure Vessels

Similar standards:

ASTM A625/A625M-13ASTM A625/A625M-13..

Historical
1.10.2013

ASTM A626/A626M-13ASTM A626/A626M-13..

Historical
1.10.2013

ASTM A635/A635M-13ASTM A635/A635M-13..

Historical
1.10.2013

ASTM A645/A645M-10ASTM A645/A645M-10..

Historical
1.10.2010

ASTM A650/A650M-13ASTM A650/A650M-13..

Historical
1.10.2013

ASTM A653/A653M-13ASTM A653/A653M-13..

Historical
1.12.2013

We recommend:

Updating of laws

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.


Latest update: 2024-12-23 (Number of items: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.



Cookies Cookies

We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Cookies Cookie - Settings
Close

Here you can customize your cookie settings according to your preferences.

Technical cookies
These cookies are essential for the proper functioning of the website and all the functions that the website offers. Technical cookies cannot be turned off because they are responsible for storing products in the cart, setting up filters, performing the shopping process, favorites list and privacy settings.
Show more
Analytical cookies
Analytical cookies allow us to measure the performance of our website and our advertising campaigns. They are used to determine the number of visits and sources of visits to our website. We process the data obtained through these cookies in a summary manner, without the use of identifiers that point to specific users of our website. If you turn off the use of analytical cookies in relation to your visit, we lose the ability to analyze performance and optimize our actions.
Show more
Personalized cookies
We also use cookies and other technologies to tailor our business to the needs and interests of our customers and prepare an exceptional shopping experience for you. By using personalized cookies, we can avoid explaining unwanted information, such as inappropriate product recommendations or useless special offers. In addition, the use of personalized cookies allows us to offer you additional features, such as product recommendations tailored to your needs.
Show more
Advertising cookies
Advertising cookies are used by us or our partners so that we can display suitable content or advertisements both on our website and on the websites of third parties. Thanks to this, we can create profiles based on your interests, so-called pseudonymized profiles. Based on this information, it is usually not possible to immediately identify you, because only pseudonymized data is used. If you do not consent, you will not be the recipient of content and ads tailored to your interests.
Show more

We need your consent to use the individual data so that you can see information about your interests, among other things.