We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Flanged Steel U-Channel Posts
Translate name
STANDARD published on 1.9.2022
Designation standards: ASTM A1075-12(2022)
Publication date standards: 1.9.2022
SKU: NS-1071818
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
This specification covers flanged U-channel carbon steel posts having a nominal weight ranging from 0.75 to 6.0 lb/ft and a nominal width ranging from 1.25 to 4.0 in. These posts are furnished in the as-wrought condition intended for applications requiring high tensile strength or crashworthiness and with a lower carbon (LC) designation for use where higher ductility or improved weldability are required. This specification indicates that tension tests and tensile tests are conducted on the flanged steel U-channel posts, and notes that retesting for failed mechanical properties may be permitted.
Keywords:
carbon steel post, delineator post, flanged U-channel post, signpost, U-channel post,, ICS Number Code 77.140.70 (Steel profiles)
1. Scope | ||||||||||||||||||
1.1?This specification covers flanged U-channel carbon steel posts having a nominal weight ranging from 0.75 lb/ft to 6.0 lb/ft and a nominal width ranging from 1.25 in. to 4.0 in. These posts are furnished in the as-wrought condition intended for applications requiring high tensile strength or crashworthiness and with a lower carbon (LC) designation for use where higher ductility or improved weldability are required. These materials are available in multiple yield strength levels of 50 ksi, 60 ksi, 70 ksi, and 80 ksi (345 MPa, 420 MPa, 485 MPa, and 550 MPa). The 50 ksi and 60 ksi (345 MPa and 420 MPa) yield strength grades are available as lower carbon posts, designated as Grades 50LC or 60LC. Note 1:?This specification does not cover high-strength
low-alloy (HSLA) post. Refer to Specification A572/A572M for HSLA. For structural Grade
36, refer to Specification A36/A36M.
1.2?UnitsThe values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-12-23 (Number of items: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.