ASTM A849-10
ASTM A861-04(2013)..
ASTM A872/A872M-14..
ASTM A943/A943M-01(2..
ASTM A949/A949M-01(2..
ASTM A972/A972M-00(2..
Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM A178/A178M-02(2012)
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
STANDARD published on 1.9.2012
The information about the standard:
Designation standards: ASTM A178/A178M-02(2012)
Note: WITHDRAWN
Publication date standards: 1.9.2012
SKU: NS-1422
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM A178/A178M-02(2012) :
Keywords:
boiler tube, resistance welded steel tube, steel tube, carbon, welded steel tube, ICS Number Code 23.040.10 (Iron and steel pipes)
Additional information
| 1. Scope | ||||||
|
1.1 This specification2 covers minimum-wall-thickness, electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes, boiler flues, superheater flues, and safe ends. 1.2 The tubing sizes and thicknesses
usually furnished to this specification are
1/2 to 5 in. [12.7 to 127 mm] in outside
diameter and 0.035 to 0.360 in. [0.9 to 9.1 mm], inclusive, in
minimum wall thickness. Tubing having other dimensions may be
furnished, provided such tubes comply with all other requirements
of this specification.
1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness. 1.4 Optional supplementary requirements are provided and when desired, shall be so stated in the order. 1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. |
||||||
| 2. Referenced Documents | ||||||
|
Similar standards:
Historical
1.12.2010
Historical
1.5.2013
Historical
1.5.2014
Historical
1.3.2014
Historical
1.3.2014
Historical
1.4.2010
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
