ASTM A182/A182M-14a

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service (Includes all amendments And changes 11/3/2014).

Automatically translated name:

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

STANDARD published on 1.5.2014

Language
Format	PDF - Immediate download - 91.00 USD Print design - 91.00 USD
Availability	IN STOCK
Price	91.00 USD excl. VAT
91.00 USD

The information about the standard:

Designation standards: ASTM A182/A182M-14a
Note: WITHDRAWN
Publication date standards: 1.5.2014
SKU: NS-1460
The number of pages: 17
Approximate weight : 51 g (0.11 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM A182/A182M-14a :

Keywords:

austenitic stainless steel, chromium alloy steel, chromium-molybdenum steel, ferritic/austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, nickel alloy steel, notch toughness requirements, pipe fittings, piping applications, pressure containing parts, stainless steel fittings, stainless steel forgings, steel, steel flanges, steel forgings, alloy, steel valves, temperature service applications, elevated, temperature service applications, high, wrought material

Additional information

1. Scope

1.1 This specification² covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards, such as the ASME specifications that are referenced in Section 2.

1.2 For bars and products machined directly from bar (other than those directly addressed by this specification; see 1.3 Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements. Several of the ferritic/austenitic (duplex) grades are also found in Specification A1049/A1049M.

1.4 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.

1.5 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.6 The values stated in either SI units or inch-pound units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

2. Referenced Documents

A965/A965M-23	Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A788/A788M-23	Standard Specification for Steel Forgings, General Requirements
A763-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A923-23	Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A739-90a(2022)	Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both (Includes all amendments and changes 3/7/2022).
A484/A484M-24	Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
A388/A388M-23	Standard Practice for Ultrasonic Examination of Steel Forgings
A336/A336M-23	Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A275/A275M-23	Standard Practice for Magnetic Particle Examination of Steel Forgings
E340-23	Standard Practice for Macroetching Metals and Alloys
E165-09	Standard Practice for Liquid Penetrant Examination for General Industry
E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
A1084-15a(2022)	Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels (Includes all amendments and changes 6/8/2022).
A1049/A1049M-18(2023)	Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A961/A961M-23	Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications


E112-13(2021)	Standard Test Methods for Determining Average Grain Size
A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A479/A479M-23a	Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels (Includes all amendments and changes 6/9/2023).

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.