Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM A758/A758M-13
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
STANDARD published on 1.10.2013
The information about the standard:
Designation standards: ASTM A758/A758M-13
Note: WITHDRAWN
Publication date standards: 1.10.2013
SKU: NS-4053
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Annotation of standard text ASTM A758/A758M-13 :
Keywords:
low, pipe fittings, piping applications, pressure containing parts, steel, temperature service applications, ICS Number Code 23.040.40 (Metal fittings)
Additional information
| 1. Scope | |||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers wrought-carbon steel butt-welding seamless or welded fittings specially processed to ensure better notch toughness than that to be expected in fittings manufactured to the requirements of Specification A234/A234M. 1.1.1 Included are elbows, caps, tees, reducers, and other type fittings covered by ASME B16.9. 1.1.2 Heat treatment is required for all fittings. 1.1.3 Fittings with mandatory radiographic examination of welds are included. 1.1.4 Supplementary requirements are provided for use when additional testing or examination is desired. 1.1.5 Cast fittings, and fittings formed from all weld metal, are not included. 1.2 Several type of fittings are
provided, as follows:
1.3 It shall be the responsibility of the purchaser to determine whether material meeting the requirements of this specification is satisfactory for the service application. 1.4 This specification is expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
|||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | |||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
