ASTM A762/A762M-15

Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

STANDARD published on 1.5.2015

Language
Format	PDF - Immediate download - 91.00 USD Print design - 91.00 USD
Availability	IN STOCK
Price	91.00 USD excl. VAT
91.00 USD

The information about the standard:

Designation standards: ASTM A762/A762M-15
Note: WITHDRAWN
Publication date standards: 1.5.2015
SKU: NS-588463
The number of pages: 11
Approximate weight : 33 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Iron and steel pipes

Annotation of standard text ASTM A762/A762M-15 :

Keywords:

corrugated steel pipe, drainage pipe, metallic coated steel pipe, polymer precoated, sewer pipe,, ICS Number Code 23.040.10 (Iron and steel pipes)

Additional information

1. Scope

1.1 This specification covers polymer precoated corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. The steel sheet used in fabrication of the pipe has a polymer protective coating over a metallic coating of zinc, 55 % aluminum-zinc alloy, or zinc-5 % aluminum-mischmetal alloy.

1.2 The polymer precoating provides extra protection of the base metal against corrosion or abrasion, or both, in addition to that provided by the metallic coating. Some severe environments may cause corrosion problems to accessory items such as rivets or coupling band hardware that does not have a polymer coating. Additional protection for polymer precoated corrugated steel pipe can be provided by use of coatings applied after fabrication of the pipe as described in Specification A849.

1.3 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The installation procedure is described in Practice A798/A798M.

1.4 This specification is applicable to orders in either inch-pound units as A762, or in SI units as A762M. Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text for clarity, but they are the applicable values when the material is ordered to A762M.

2. Referenced Documents

B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
A796/A796M-21	Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
C443-21	Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
D1005-95(2020)	Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1056-20	Standard Specification for Flexible Cellular Materials´Sponge or Expanded Rubber
F568M-07	Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
A493-23	Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A307-21	Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A449-14(2020)	Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A563M-07	Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A798/A798M-22	Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A849-15(2021)	Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A929/A929M-18	Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A90/A90M-21	Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A742/A742M-23a	Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe (Includes all amendments and changes 12/19/2023).
A780-01	Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

Similar standards:

ASTM A861-04(2013)..

Historical
1.5.2013

ASTM A872/A872M-14..

Historical
1.5.2014

ASTM A943/A943M-01(2..

Historical
1.3.2014

ASTM A949/A949M-01(2..

Historical
1.3.2014

ASTM A972/A972M-00(2..

Historical
1.4.2010

ASTM A978/A978M-08(2..

Historical
1.11.2013

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.