ASTM B545-13

Standard Specification for Electrodeposited Coatings of Tin

STANDARD published on 1.5.2013

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM B545-13
Note: WITHDRAWN
Publication date standards: 1.5.2013
SKU: NS-7107
The number of pages: 9
Approximate weight : 27 g (0.06 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Metallic coatings

Annotation of standard text ASTM B545-13 :

Keywords:

electrodeposited tin, electroplated tin, tin, tin coatings, ICS Number Code 25.220.40 (Metallic coatings)

Additional information

1. Scope

1.1 This specification covers the requirements for electrodeposited (electroplated) coatings of tin applied to metallic articles. Tin coatings are used to provide a low contact-resistance surface, to protect against corrosion (see 1.2 Some corrosion can be expected from tin coatings exposed outdoors. In normal indoor exposure, tin is protective on iron, steel, nickel, copper, and their alloys. Corrosion can be expected at discontinuities in the coating (such as pores) due to galvanic couples formed between the tin and the underlying metal through the discontinuities, especially in humid atmospheres. Porosity increases as the coating thickness decreases, so that minimum thicknesses must be specified for each application. Parts coated with tin can be assembled safely in contact with iron and steel, tin-coated aluminum, yellow chromated zinc, cadmium, and solder coatings. (See 1.3 This specification applies to electroplated coatings of not less than 99 % tin (except where deliberately alloyed for special purposes, as stated in 1.4 This specification does not apply to hot-dipped tin or other non-electrodeposited coating; it also does not apply to mill products. For mill products, refer to Specifications A623 or A623M.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B32-20	Standard Specification for Solder Metal
B697-88(2021)	Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B281-88(2019)e1	Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings (Includes all amendments and changes 5/14/2019).
A623-22	Standard Specification for Tin Mill Products, General Requirements
A623M-22	Standard Specification for Tin Mill Products, General Requirements [Metric]
B320-60(2019)	Standard Practice for Preparation of Iron Castings for Electroplating
B659-90(2021)	Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B762-21	Standard Guide of Variables Sampling of Metallic and Inorganic Coatings
B571-23	Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B568-98(2021)	Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B374-21	Standard Terminology Relating to Electroplating
B487-20	Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
B499-09(2021)e1	Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Includes all amendments and changes 5/18/2021).
B558-79(2019)	Standard Practice for Preparation of Nickel Alloys for Electroplating
B567-98(2021)	Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B602-21	Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings
B849-02(2023)	Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B850-98(2022)	Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B765-03(2023)	Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
B809-95(2018)	Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
B851-04(2020)	Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
D3951-18(2023)	Standard Practice for Commercial Packaging
B542-13(2019)	Standard Terminology Relating to Electrical Contacts and Their Use
B183-18(2022)	Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B246-15(2021)	Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B322-99(2020)e1	Standard Guide for Cleaning Metals Prior to Electroplating (Includes all amendments and changes 12/7/2020).
B504-90(2023)	Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B507-14(2021)	Standard Practice for Design of Articles to Be Electroplated on Racks
B678-23	Standard Test Method for Solderability of Metallic-Coated Products
B242-99(2020)	Standard Guide for Preparation of High-Carbon Steel for Electroplating

Similar standards:

ASTM B579-73(2009)..

Historical
1.9.2009

ASTM B602-88(2010)..

Historical
1.4.2010

ASTM B604-91(2008)..

Historical
1.8.2008

ASTM B605-95a(2009)..

Historical
1.9.2009

ASTM B607-91(2009)..

Historical
1.9.2009

ASTM B633-13

Historical
15.5.2013

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.