ASTM C1427-16

Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

Translate name

STANDARD published on 1.12.2016

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM C1427-16
Note: WITHDRAWN
Publication date standards: 1.12.2016
SKU: NS-673837
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Heat recovery. Thermal insulation

Annotation of standard text ASTM C1427-16 :

Keywords:

flexible thermal insulation, polyethylene foam, polyolefin foam, polyolefin thermal insulation, preformed thermal insulation, thermal insulating materials - pipe, thermal insulating materials - sheet,, ICS Number Code 27.220 (Heat recovery. Thermal insulation)

Additional information

1. Scope

1.1 This specification covers extruded preformed flexible cellular polyolefin thermal insulation operating temperatures from –150°F to 200°F (–101°C to 93°C). For specific applications, the actual temperature limit shall be agreed upon between the manufacturer and the purchaser.

1.2 The use of thermal insulation materials covered by this specification are governed by codes and standards that address fire performance. Contact manufacturer for specific performance of product at the intended use thickness.

1.3 This specification covers the physical properties of preformed flexible cellular polyolefin thermal insulation, which have been deemed mandatory for thermal design. Physical properties such as density and coefficient of thermal expansion (CTE) have been deemed nonmandatory for thermal design. Nonmandatory physical properties have been included in Appendix X1 for information purposes only.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C1114-06(2019)	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1303-09	Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C1304-23	Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C534-07	Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
D883-24	Standard Terminology Relating to Plastics
D1622-20	Standard Test Method for Apparent Density of Rigid Cellular Plastics
D1667-22	Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
D3575-20	Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
C1763-20	Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
E456-13a(2022)	Standard Terminology Relating to Quality and Statistics (Includes all amendments and changes 4/21/2022).
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E2231-21	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
E96/E96M-23	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
E177-20	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E228-22	Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
CAN/ULC-S102.2	Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies.
C168-22	Standard Terminology Relating to Thermal Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C335-05a	Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C390-08(2019)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C447-15(2022)	Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C585-22	Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C670-24a	Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials (Includes all amendments and changes 3/11/2024).
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1058-03	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.