ASTM C150-07

Standard Specification for Portland Cement

STANDARD published on 1.5.2007

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM C150-07
Note: WITHDRAWN
Publication date standards: 1.5.2007
SKU: NS-11578
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C150-07 :

Keywords:

hydraulic cement, portland cement, specification, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1 This specification covers eight types of portland cement, as follows (see Note 2):

1.1.1 Type I - For use when the special properties specified for any other type are not required.

1.1.2 Type IA - Air-entraining cement for the same uses as Type I, where air-entrainment is desired.

1.1.3 Type II - For general use, more especially when moderate sulfate resistance or moderate heat of hydration is desired.

1.1.4 Type IIA - Air-entraining cement for the same uses as Type II, where air-entrainment is desired.

1.1.5 Type III - For use when high early strength is desired.

1.1.6 Type IIIA - Air-entraining cement for the same use as Type III, where air-entrainment is desired.

1.1.7 Type IV - For use when a low heat of hydration is desired.

1.1.8 Type V - For use when high sulfate resistance is desired.

Note 2

Some cements are designated with a combined type classification, such as Type I/II, indicating that the cement meets the requirements of the indicated types and is being offered as suitable for use when either type is desired.

Note 0

Cement conforming to the requirements for all types are not carried in stock in some areas. In advance of specifying the use of cement other than Type I, determine whether the proposed type of cement is, or can be made, available.

1.2 When both SI and inch-pound units are present, the SI units are the standard. The inch-pound units are approximations listed for information only.

1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

2. Referenced Documents

C266-21	Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C451-21	Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452-21	Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C465-23	Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C563-20	Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
C1038-04	Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
C33-07	Standard Specification for Concrete Aggregates
C51-23	Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C114-23	Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115-10	Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C151-05	Standard Test Method for Autoclave Expansion of Hydraulic Cement
C183-13	Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185-20	Standard Test Method for Air Content of Hydraulic Cement Mortar
C186-17	Standard Test Method for Heat of Hydration of Hydraulic Cement (Withdrawn 2019)
C191-21	Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C204-24	Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C219-20a	Standard Terminology Relating to Hydraulic and Other Inorganic Cements (Includes all amendments and changes 8/28/2020).
C226-22	Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.