We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
Translate name
STANDARD published on 1.6.2016
Designation standards: ASTM C1635-16
Note: WITHDRAWN
Publication date standards: 1.6.2016
SKU: NS-642235
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
adhesion, adhesive defect, casting spacer, cohesion, cohesive defect, constant strain, immersion, primer, sealant, separator, standard conditions, substrate,, ICS Number Code 21.140 (Seals, glands)
Significance and Use | ||||||||
5.1 In any sealant application, the sealant must be capable of maintaining an adhesive bond to the substrate when held in strain for its intended service life. 5.2 This test method is an indicator of a sealant’s ability to adhere under strain to a given substrate. 5.3 The default test strain is the movement ability of the sealant as designated by the manufacturer. The default joint configuration is 12.7 × 12.7 × 50.8 mm (1/2 × 1/2 × 2 in.). Other strains and joint configurations may be used and reported as noted in Section 8 and Table 1. |
||||||||
1. Scope | ||||||||
1.1 This test method describes a laboratory procedure for measuring the adhesion/cohesion properties of a sealant when subjected to tensile loads resulting from an applied specified strain. The adhesion/cohesion properties are evaluated before, during, and after water immersion. 1.2 This test method examines the adhesive and cohesive performance of a sealant on a specified substrate at a strain equivalent to a multiple of the strain/movement capability designated by the manufacturer for the given sealant per Specification C920. 1.3 The values stated in SI (metric) units are to be regarded as the standard. The inch values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 Comparable Test: 1.5.1 ISO 10590, Building construction - Jointing products - Sealants - Determination of adhesion/cohesion properties at maintained extension after immersion in water 1.5.2 ISO 8340, Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension |
||||||||
2. Referenced Documents | ||||||||
|
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-09-25 (Number of items: 2 350 354)
© Copyright 2024 NORMSERVIS s.r.o.