ASTM C449-07(2013)

Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

STANDARD published on 1.3.2013

Language
Format	PDF - Immediate download - 73.00 USD Print design - 73.00 USD
Availability	IN STOCK
Price	73.00 USD excl. VAT
73.00 USD

The information about the standard:

Designation standards: ASTM C449-07(2013)
Note: WITHDRAWN
Publication date standards: 1.3.2013
SKU: NS-13444
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Cement. Gypsum. Lime. Mortar

Annotation of standard text ASTM C449-07(2013) :

Keywords:

cement, finishing, hydraulic-setting, insulating, mineral fiber, thermal, thermal conductivity, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1 This specification covers mineral fiber (rock or slag) insulating and finishing cement shipped in dry-mix form, including hydraulic-setting binder, which, when mixed with water and applied in accordance with the manufacturer's directions, affords a smooth surface as a final finish for heated surfaces up to 1200 °F (649 °C) for specific applications. The actual temperature limit shall be agreed upon between the purchaser and the manufacturer.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 The following safety hazards caveat pertains only to the test method (Section 10) described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 When the installation or use of thermal insulation materials, accessories, and systems pose safety or health problems, the manufacturer shall provide the user with appropriate current information regarding any known problems associated with the recommended use of the company's products and shall also recommend protective measures to be employed in their safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

C1114-06(2019)	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
E136-24	Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 ?C
C166-05(2023)	Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C163-05(2023)	Standard Practice for Mixing Thermal Insulating Cement Samples
C1058-03	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C390-08(2019)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C795-08(2023)	Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C356-22	Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C168-22	Standard Terminology Relating to Thermal Insulation

Similar standards:

ASTM C452/C452M-10..

Historical
1.6.2010

ASTM C465-10

Historical
1.2.2010

ASTM C466-03(2012)..

Historical
1.8.2012

ASTM C471M-13

Historical
1.12.2013

ASTM C472-99(2014)..

Historical
1.4.2014

ASTM C473-12

Historical
1.9.2012

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.