We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
STANDARD published on 1.12.2015
Designation standards: ASTM C509-06(2015)
Note: WITHDRAWN
Publication date standards: 1.12.2015
SKU: NS-622410
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
cellular, compression, elastomer, elastomeric, gasket, glazing, preformed, seal, sealing ,, ICS Number Code 83.140.50 (Seals)
Significance and Use | ||||||||||||||||||||
9.1 Flame Propagation: 9.1.1 This specification has two options: 9.1.1.1 Option I—Flame propagation test is required. 9.1.1.2 Option II—Flame propagation test is not required. 9.1.2 In case no option is specified, Option I will apply. 9.2 This specification has two classifications as related to ozone resistance. These are Type I and Type II, with the latter having the greater resistance to ozone. The type should be specified when making reference to this specification but in the event that the type is not specified, Type II shall apply. Note 2: Type II is included in this specification for use
where greater ozone resistance is required.
|
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This specification applies to those elastomeric cellular materials of a firm grade that are manufactured in preformed shapes for use as gaskets and for use as sealing materials, in the form of compression seals or gaskets, or both, for glazing other building joint applications. Note 1: For softer cellular elastomeric materials used in
secondary sealing applications, refer to Specification D1056.
1.2 Test Method C1166, as referenced in this specification, should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.3 The following precautionary caveat pertains only to the test method portion, Section 11, of this specification: 1.4 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-09-25 (Number of items: 2 350 354)
© Copyright 2024 NORMSERVIS s.r.o.