ASTM C610-17(2023)

Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

Translate name

STANDARD published on 1.3.2023

Language
Format	PDF - Immediate download - 61.00 USD Print design - 61.00 USD
Availability	IN STOCK
Price	61.00 USD excl. VAT
61.00 USD

The information about the standard:

Designation standards: ASTM C610-17(2023)
Publication date standards: 1.3.2023
SKU: NS-1136867
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Thermal and sound insulating materials

Annotation of standard text ASTM C610-17(2023) :

This specification covers molded expanded perlite block, fittings, and pipe thermal insulation intended for use on surfaces with temperatures of certain range. The insulation shall not have visible defects that will adversely affect its service qualities. Different test methods shall be performed in order to determine the properties of the block, fitting, and pipe insulations: density, apparent thermal conductivity, linear shrinkage after heat soaking, flexural strength, compressive strength, weight loss by tumbling, moisture content, water absorption after heat aging, surface bearing characteristics, hot-surface performance, and stress corrosion cracking of austenitic stainless steel.

Keywords:

block, expanded perlite, fittings, molded, pipe, thermal insulation ,, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Additional information

1. Scope

1.1?This specification covers molded expanded perlite block, fittings, and pipe thermal insulation intended for use on surfaces with temperatures between 80 to 1200?F (27 to 649?C).

1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
C302-13(2022)	Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-21	Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C335/C335M-23	Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C356-22	Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C390-08(2019)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C421-08(2020)	Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C168-22	Standard Terminology Relating to Thermal Insulation
C585-22	Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C795-08(2023)	Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C450-18	Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
E136-24	Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 ?C
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1058/C1058M-10(2023)	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1616-07(2018)	Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617-19	Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1763-20	Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
C203-22	Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.