We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
STANDARD published on 1.9.2006
Designation standards: ASTM C828-11
Note: WITHDRAWN
Publication date standards: 1.9.2006
SKU: NS-15206
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
air test, clay pipe, pipe, pressure test, sewers, testing, test section, vitrified clay pipe, Acceptance criteria/testing--clay pipe/fittings, Air pressure testing--building constructions/materials, Clay pipe/piping systems, Field testing, Low-pressure air test, Pressure testing--pipes, Vitrified clay pipe/fittings, ICS Number Code 23.040.01 (Pipeline components in general. Pipelines)
1. Scope | ||||||
1.1 This test method defines procedures for testing vitrified clay pipe lines, using low-pressure air, to demonstrate the integrity of the installed line. Refer to Practice C 12. 1.2 This test method shall be performed on lines after connection laterals, if any, have been plugged and braced adequately to withstand the test pressure, and after the trenches have been backfilled for a sufficient time to generate a significant portion of the ultimate trench load on the pipe line. The time between completion of the backfill operation and low-pressure air testing shall be determined by the approving authority. 1.3 This test method may also be used as a preliminary test, which enables the installer to demonstrate the condition of the line prior to backfill and further construction activities. 1.4 This test method is suitable for testing gravity-flow sewer pipe constructed of vitrified clay or combinations of clay and other pipe materials. 1.5 Terminology C 896 is to be used for clarification of terminology in this test method. 1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historical
1.3.2010
Historical
1.5.2012
Historical
1.7.2012
Historical
1.7.2012
Historical
1.7.2012
Historical
1.8.2010
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-12-22 (Number of items: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.