Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM D2628-91(2016)
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Translate name
STANDARD published on 1.10.2016
The information about the standard:
Designation standards: ASTM D2628-91(2016)
Publication date standards: 1.10.2016
SKU: NS-666142
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM D2628-91(2016) :
This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements. The seal consists of a multiple web design and is installed with a lubricant. The seal functions by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seals shall be preformed, and the material shall be vulcanized elastomeric compound using polychloroprene as the only base polymer. The materials shall also comply with the physical properties prescribed herein such as tensile strength, elongation, hardness, oil swell, ozone resistance, low-temperature stiffening, low-temperature recovery, and compression deflection.
Keywords:
ICS Number Code 93.080.10 (Road construction)
Additional information
| 1. Scope | ||||||||||||||||||
|
1.1 This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements. The seal consists of a multiple web design and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant and is designed to seal the joint and reject incompressibles. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: This specification is a manufacturing and purchasing
specification only and does not include requirements or
considerations for selection of size, or the installation of the
joint seals. However, experience has shown that successful
performance of this product depends upon the proper selection of
size and cross-sectional design of the joint seal, joint size, and
joint spacing for the ambient conditions the pavement will be
exposed to, and care in the installation of the joint
seals.
|
||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||
|
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
