ASTM D3655-14 1.2.2014 | technical standard

The information about the standard:

Language
Format	PDF - Immediate download - 73.00 USD Print design - 73.00 USD
Availability	IN STOCK
Price	73.00 USD excl. VAT
73.00 USD

Designation standards: ASTM D3655-14
Note: WITHDRAWN
Publication date standards: 1.2.2014
SKU: NS-24355
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM

Additional information


Significance and Use
4.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. Characteristic	Requirements	Section
Bursting strength (Ball Burst)^A	70 lbf (311 N) min	7.1
Dimensional Change:
After 5 launderings	3 % max, in each direction	7.1
After 3 drycleanings	2 % max, in each direction	7.2
Colorfastness:
Burnt gas fumes, 2 cycles:		7.3.1
Shade change original fabric	Class 4^B min
Shade change after 1 laundering or 1 drycleaning	Class 4^B min	7.3.8
Sodium Hypochlorite Bleach	Class 4^B min	7.3.9
Powdered Non-chlorine Bleach	Class 4^B min
Laundering:^E		7.3.2
Shade change	Class 4^B min
Staining	Class 3^C min
Drycleaning:		7.3.3
Shade change	Class 4^B min
Crocking:^E		7.3.4
Dry	Class 4^D min
Wet	Class 3^D min
Water:^E		7.3.5
Shade change	Class 4^B min
Staining	Class 4^C min
Perspiration (acid phase)^E		7.3.6
Shade change	Class 4^B min
Staining	Class 3^C min
Light (40 AATCC FU) (xenon arc)^A	Step 4^B min	7.3.7
Flammability	pass	7.4

4.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in 4.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D3655 except for the following characteristic(s).

4.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.

4.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.

1. Scope

1.1 This performance specification covers men's and women's sliver knitted overcoat and jacket fabrics composed of any textile fiber or mixture of textile fibers.

1.2 This performance specification is not applicable to knitted fabrics used for interlinings.

1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.

1.4 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D2905-97	Standard Practice for Statements on Number of Specimens for Textiles
D2724-19	Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics
D3786-08	Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
D3787-16(2020)	Standard Test Method for Bursting Strength of Textiles´Constant-Rate-of-Traverse (CRT) Ball Burst Test
D7022-13	Standard Terminology Relating to Apparel
D123-23	Standard Terminology Relating to Textiles

ASTM D3655-14

The information about the standard:

The category - similar standards:

Annotation of standard text ASTM D3655-14 :

Additional information

Similar standards: