We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Leveling of Paints by Draw-Down Method
STANDARD published on 15.4.2011
Designation standards: ASTM D4062-11
Note: WITHDRAWN
Publication date standards: 15.4.2011
SKU: NS-25899
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
leveling of paints, rheological properties, flow, Architectural paints/coatings, Draw-down test, Latex paints, Leveling characteristics, Solventborne paints/coatings, Waterborne coatings, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use |
Leveling can affect the hiding and appearance of applied architectural coatings, the presence of brushmarks and surface irregularities being more conspicuous with gloss and semi-gloss finishes than with flat finishes. Instrumental evaluations of leveling by this test method have been shown to correlate with those made by brush application. |
1. Scope |
1.1 This test method covers the laboratory determination of the relative leveling of water and solvent-reducible architectural paints in white and light tints by comparing the ridges produced in a draw-down film to a series of plastic leveling standards. 1.2 Unpigmented, texture, and deep-tint coatings cannot be readily evaluated with the shadowing produced by oblique lighting employed in this test method. Such coatings may be rated by comparing them with the plastic standards at various angles of reflection. For this purpose ordinary room lighting is satisfactory. 1.3 Since other factors may influence the tendency of liquid paints to sag, this test method is not intended to measure sagging. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Historical
1.6.2009
Historical
15.3.2013
Historical
1.1.2014
Historical
1.11.2008
Historical
15.5.2010
Historical
1.6.2011
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-12-22 (Number of items: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.