We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
STANDARD published on 1.5.2012
Designation standards: ASTM D430-06(2012)
Note: WITHDRAWN
Publication date standards: 1.5.2012
SKU: NS-26741
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
crack growth, DeMattia flexing machine, DuPont flexing machine, flex fatigue, flexing, flexing fatigue, ply separation, rubber products, Scott flexing machine, Cracking--rubber, DeMattia flexing machine, Deterioration--rubber, Dupont flexing machine, Dynamic fatigue, Fatigue, Flexing fatigue, Ply separation, Rubber belting, Rubber textile composites, Scott flexing machine, Tire cords and tire cord fabrics, Tire testing, ICS Number Code 83.060 (Rubber)
Significance and Use | ||||||||||||
Tests for dynamic fatigue are designed to simulate the continually repeated distortions received in service by many rubber articles, such as tires, belts, footwear, and molded goods. These distortions may be produced by extension, compressive, and bending forces or combinations thereof. The effect of the distortions is to weaken the rubber until surface cracking or rupture occurs. Where rubber is combined with other flexible materials such as fabric, the effect may be evidenced by separation at the interface between the materials, caused either by breaking of the rubber or failure of the adhesion or both. These tests are, therefore, of the following two types: Type I—Tests designed to produce separation of rubber-fabric combinations by controlled bending of the specimens. Type II—Tests designed to produce cracking on the surface of rubber by either repeated bending or extension as may occur in service. |
||||||||||||
1. Scope | ||||||||||||
1.1 These test methods cover testing procedures that estimate the ability of soft rubber materials to resist dynamic fatigue. No exact correlation between these test results and service is given or implied. This is due to the varied nature of service conditions. These test procedures do yield data that can be used for the comparative evaluation of rubber or composite rubber-fabric materials for their ability to resist dynamic fatigue. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historical
1.5.2012
Historical
1.7.2009
Historical
1.11.2013
Historical
1.2.2011
Historical
1.5.2012
Historical
1.1.2010
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-12-22 (Number of items: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.