Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM D4802-16
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
Translate name
STANDARD published on 1.5.2016
The information about the standard:
Designation standards: ASTM D4802-16
Publication date standards: 1.5.2016
SKU: NS-638528
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM D4802-16 :
This specification covers monolithic methacrylate sheets produced by various processes. For this specification, methacrylate sheet shall be composed of polymerized acrylic monomers of which at least 80% shall be methyl methacrylate. Materials shall be classified under categories and finishes: Category A-1; Category A-2; Category B-1; and Category B-2.Finish 1; Finish 2; Finish 3; Type UVF; and Type UVT. Tests shall be performed to determine the properties of the material in accordance with following test methods: test conditions; index of refraction; specific gravity; luminous transmittance; haze; water-absorption; shrinkage; thermal stability; deflection temperature under flexural load; tensile strength and elongation at break; impact strength; spectral transmittance of Type UVF and UVT sheet; abrasion resistance; coating adhesion; and chemical resistance.
Keywords:
acrylic, acrylic sheet, plastic, plastic sheet, PMMA, poly(methyl methacrylate), recycled material, transparent plastic, sheet,, ICS Number Code 83.140.10 (Films and sheets)
Additional information
| 1. Scope | ||||||||||||||||||||||||||||||||
|
1.1 This specification covers monolithic methacrylate sheets produced by various processes. For this specification, methacrylate sheet shall be composed of polymerized acrylic monomers of which at least 80 % shall be methyl methacrylate. Note 1: This specification is intended to consolidate the
requirements of the Cast Methacrylate Plastic Sheets portion of
discontinued Fed. Spec. L-P-391D, discontinued Specification
D702. Cast Methacrylate
Plastic Sheets, Rods, Tubes and Shapes, and discontinued
Specification D1547, Extruded
Acrylic Plastic Sheet.
1.2 This specification is intended to cover acrylic sheet for general-purpose applications. For specialty applications consult the appropriate use standards. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: 1.4 Acrylic sheet is used frequently in applications in which extreme clarity, lack of optical distortion and absence of any foreign particulate matter are of primary significance. Reground material is suitable for use as long as careful control is used to eliminate adverse effects on these properties. The use of recycled material in type B-1 and B-2 sheet, is not suitable for use when these properties are adversely affected. The use of recycled or reground material is not possible for type A-1 and A-2 materials since the sheet is produced directly from monomer Note 2: This standard and ISO 7823-1 address the same subject
matter, but differ in technical content.
|
||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||
|
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
