We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
STANDARD published on 1.4.2012
Designation standards: ASTM D5349-95(2012)
Note: WITHDRAWN
Publication date standards: 1.4.2012
SKU: NS-30827
The number of pages: 2
Approximate weight : 6 g (0.01 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
hot plate method, leather, moisture content, sulfonated and sulfated oils, volatile content, Fatliquors, Fats and oils, Leather cleaning/softening compounds, Softening and stuffing compounds, Sulfonated and sulfated oils, Volatile matter content--cleaning compounds/detergents, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||
This test method is intended to determine the moisture and volatile content of fats, oils, and fatliquors used in the softening and stuffing of leather. |
||
1. Scope | ||
1.1 This test method covers the determination of the percentage of water and other compounds volatile at about 100°C existing in a sample of sulfonated or sulfated oil, or both, by rapid evaporation. This test method is applicable only to sulfonated and sulfated oils that do not contain the following: mineral acids, free sulfonic acids or free sulfuric acid esters, ammonia, acetic acid or similar volatile acids, alkali hydroxides, carbonates, acetates or similar salts that may react with oleic acid at elevated temperatures liberating volatile acids, or glycerin, diethylene glycol, xylene, or other compounds of similar volatility. This test method was derived from Test Methods D500, Sections 10 through 14. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historical
1.5.2014
Historical
1.5.2014
Historical
1.1.2014
Historical
1.12.2012
Historical
1.7.2010
Historical
15.4.2012
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-12-23 (Number of items: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.