We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration)
STANDARD published on 10.12.1997
Designation standards: ASTM D5650-97
Note: WITHDRAWN
Publication date standards: 10.12.1997
SKU: NS-32036
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
Bending resistance, Cut-sized papers, Flexible paper, Low-bending stiffness, Low grammage paper, Paper, Resistance to bending, Stiffness, Taber tester, bending resistance-paper of low-bending stiffness, using taber-type, tester in 0-10 stiffness unit configuration, test
1. Scope | ||||||||||
1.1 This test method covers a procedure used to measure the resistance to bending of papers which are of low grammage or high flexibility, or both, and which exhibit bending stiffness in the range from 0 to 10 Taber stiffness units. 1.2 The bending moment required to deflect the free end of a 38-mm (1.5-in.) wide vertically clamped specimen 15° from its center line when the load is applied 10 mm (0.39 in.) away from the clamp is determined. The resistance to bending is calculated from the bending moment. 1.3 The instrument used in this test method is identical to that described in Test Method D5342, used in the modified configuration described in Section 9. 1.4 Test results obtained using the Taber-Type tester as described in this test method have been reported to be as much as 40% different from those obtained using Test Method D5342, and this test method shall not be used where Test Method D5342 is specified. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-11-12 (Number of items: 2 210 658)
© Copyright 2024 NORMSERVIS s.r.o.