ASTM D5819-05(2012)

Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

STANDARD published on 1.7.2012

Language
Format	PDF - Immediate download - 91.00 USD Print design - 91.00 USD
Availability	IN STOCK
Price	91.00 USD excl. VAT
91.00 USD

The information about the standard:

Designation standards: ASTM D5819-05(2012)
Note: WITHDRAWN
Publication date standards: 1.7.2012
SKU: NS-32677
The number of pages: 11
Approximate weight : 33 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Geotextiles Test conditions and procedures in general

Annotation of standard text ASTM D5819-05(2012) :

Keywords:

aging, degradation, durability, environment, exposure, geosynthetic, long-term performance, ICS Number Code 19.020 (Test conditions and procedures in general), 59.080.70 (Geotextiles)

Additional information

Significance and Use

4.1 Designers/specifiers of geosynthetics should evaluate geosynthetic durability as an integral part of the geosynthetic specification/selection process. This guide is intended to guide a designer/specifier through a systematic determination of degradation concerns based on the intended geosynthetic function or performance characteristic. This guide then provides a guide to select available test methods for experimentally evaluating geosynthetic durability and to identify areas where no suitable test exists.

4.2 This guide does not address the evaluation of degradation resulting from manufacturing, handling, transporting or installing the geosynthetic.

1. Scope

1.1 This guide covers a designer/specifier through a systematic determination of those factors of the appropriate application environment that may affect the post-construction service life of a geosynthetic. Subsequently, test methods are recommended to facilitate an experimental evaluation of the durability of geosynthetics in a specified environment so that the durability can be considered in the design process.

Containment^B

Filtration^A

Insulation^B

Protection^A

Reinforcement^A

Screening^B

Separation^A

Vegetative Reinforcement^B (VR)—A geosynthetic provides vegetative reinforcement when it extends the erosion control limits and performance of vegetation.

Note—during the placement of fresh concrete in a geotextile flexible form, the geosynthetic functions temporarily as a filter to allow excess water to escape.

1.2 This guide is not intended to address durability issues associated with the manufacturing, handling, transportation, or installation environments.

2. Referenced Documents

D4355-07	Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
D5101-23	Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
D5262-21	Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
D5322-23	Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
D5397-20	Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
D4716-08	Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D4886-23	Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
D5496-15(2020)	Standard Practice for In-Field Immersion Testing of Geosynthetics
D5970-09	Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
D5885-06	Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
D5567-94(2018)	Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
D4594-96	Standard Test Method for Effects of Temperature on Stability of Geotextiles
D1204-14(2020)	Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1987-22	Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
D2990-17	Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
D3083-89	Specification for Flexible Poly (Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining (Withdrawn 1998)
D3895-19	Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry