ASTM D6483-04

Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)

STANDARD published on 1.11.2004

Language
Format	PDF - Immediate download - 91.00 USD Print design - 91.00 USD
Availability	IN STOCK
Price	91.00 USD excl. VAT
91.00 USD

The information about the standard:

Designation standards: ASTM D6483-04
Note: WITHDRAWN
Publication date standards: 1.11.2004
SKU: NS-35329
The number of pages: 18
Approximate weight : 54 g (0.12 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D6483-04 :

Keywords:

cylinder liner wear, diesel engine oil, lead, lubricants, soot, top ring weight loss, T-9 Diesel Engine, ICS Number Code 27.060.10 (Liquid and solid fuel burners)

Additional information

Significance and Use

This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines. Obtain results from used oil analysis and component measurements before and after test.

The test method may be used for engine oil specification acceptance when all details of the procedure are followed.

1. Scope

1.1 This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including lead corrosion and wear of piston rings and cylinder liners. This test method is commonly referred to as the Mack T-9.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Annex A5 for specific safety precautions.

2. Referenced Documents

D482-19	Standard Test Method for Ash from Petroleum Products
D524-15(2019)	Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D613-24	Standard Test Method for Cetane Number of Diesel Fuel Oil
D664-18e2	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration (Includes all amendments and changes 1/4/2019).
D1319-20a	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption (Includes all amendments and changes 9/14/2020).
D2500-23	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E178-21	Standard Practice for Dealing With Outlying Observations
E344-23	Terminology Relating to Thermometry and Hydrometry
SAE J1995	Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power Rating
D2709-22	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2896-21	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4485-22e1	Standard Specification for Performance of Active API Service Category Engine Oils (Includes all amendments and changes 12/8/2022).
D4737-21	Standard Test Method for Calculated Cetane Index by Four Variable Equation
D4739-23	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5302-01a	Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
D5844-98	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
D5967-21	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
D86-23ae1	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).
D93-20	Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D130-19	Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D235-22	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D287-22	Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.