ASTM D6709-14

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

STANDARD published on 1.5.2014

Language
Format	PDF - Immediate download - 119.00 USD Print design - 119.00 USD
Availability	IN STOCK
Price	119.00 USD excl. VAT
119.00 USD

The information about the standard:

Designation standards: ASTM D6709-14
Note: WITHDRAWN
Publication date standards: 1.5.2014
SKU: NS-36234
The number of pages: 40
Approximate weight : 120 g (0.26 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D6709-14 :

Keywords:

bearing weight loss, CLR oil test engine, copper-lead bearings, engine oil, oil consumption, Sequence VIII test, shear stability, ICS Number Code 75.100 (Lubricants, industrial oils and related products)

Additional information

Significance and Use

5.1 This test method is used to evaluate automotive engine oils for protection of engines against bearing weight loss.

5.2 This test method is also used to evaluate the SIG capabilities of multiviscosity-graded oils.

5.3 Correlation of test results with those obtained in automotive service has not been established.

5.4 Use—The Sequence VIII test method is useful for engine oil specification acceptance. It is used in specifications and classifications of engine lubricating oils, such as the following:

5.4.1 Specification D4485.

5.4.2 API Publication 1509 Engine Oil Licensing and Certification System.⁶

5.4.3 SAE Classification J304.

1. Scope

1.1 This test method covers the evaluation of automotive engine oils (SAE grades 0W, 5W, 10W, 20, 30, 40, and 50, and multi-viscosity grades) intended for use in spark-ignition gasoline engines. The test procedure is conducted using a carbureted, spark-ignition Cooperative Lubrication Research (CLR) Oil Test Engine (also referred to as the Sequence VIII test engine in this test method) run on unleaded fuel. An oil is evaluated for its ability to protect the engine and the oil from deterioration under high-temperature and severe service conditions. The test method can also be used to evaluate the viscosity stability of multi-viscosity-graded oils. Companion test methods used to evaluate engine oil performance for specification requirements are discussed in the latest revision of Specification D4485.

1.2 Correlation of test results with those obtained in automotive service has not been established. Furthermore, the results obtained in this test are not necessarily indicative of results that will be obtained in a full-scale automotive spark-ignition or compression-ignition engine, or in an engine operated under conditions different from those of the test. The test can be used to compare one oil with another.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3.1 Exceptions—The values stated in inch-pounds for certain tube measurements, screw thread specifications, and sole source supply equipment are to be regarded as standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This test method is arranged as follows:

Subject

Section

Introduction

Scope

1

Referenced Documents

2

Terminology

3

Summary of Test Method

4

Before Test Starts

4.1

Power Section Installation

4.2

Engine Operation (Break-in)

4.3

Engine Operation (Test/Samples)

4.4

Stripped Viscosity

4.5

Test Completion (BWL)

4.6

Significance and Use

5

Evaluation of Automotive oils

5.1

Stay in Grade Capabilities

5.2

Correlation of Results

5.3

Use

5.4

Apparatus

6

Test Engineering, Inc.

6.1

Fabricated or Specially Prepared Items

6.2

Instruments and Controls

6.3

Procurement of Parts

6.4

Reagents and Materials

7

Reagents

7.1

Cleaning Materials

7.2

Expendable Power Section-Related Items

7.3

Power Section Coolant

7.4

Reference Oils

7.5

Test Fuel

7.6

Test Oil Sample Requirements

8

Selection

8.1

Inspection

8.2

Quantity

8.3

Preparation of Apparatus

9

Test Stand Preparation

9.1

Conditioning Test Run on Power Section

9.2

General Power Section Rebuild Instructions

9.3

Reconditioning of Power Section After Each Test

9.4

Calibration

10

Power Section and Test Stand Calibration

10.1

Instrumentation Calibration

10.2

Calibration of AFR Measurement Equipment

10.3

Calibration of Torque Wrenches

10.4

Engine Operating Procedure

11

Run-In and Flush

11.1

Test Operating Conditions

11.2

Air-Fuel Ratio and Spark Advance

11.3

Air, Off-Gas and Blowby Measurement

11.4

Unscheduled Shutdowns

11.5

Oil Sampling and Oil Addition

11.6

Periodic Measurements

11.7

Final Oil Drain and Oil Consumption Computation

11.8

Operational Validity Criteria

11.9

Test Completion

11.10

Determination of Test Results

12

Oil Analysis

12.1

Test Bearing Weight Loss Determination

12.2

Report

13

Precision and Bias

14

Precision

14.1

Bias

14.2

Use of ASTM Rounding

15

Keywords

16

ANNEXES

Measurement of Connecting Rod Bearing Clearance and
Journal Taper

Measurement of Main Bearing Clearance

The ASTM Test Monitoring Center Calibration Program

Measurement of Piston-to-Sleeve Clearance

Control Chart Technique for a Laboratory's Severity
Adjustment (SA)

Recommended New Liner Honing Procedure

Sequence VIII Oil Priming Procedure

Alternative Crankcase Breather Configuration

Connecting Rod Bearing Cleaning Procedure

Electronic Ignition Conversion

System Response Procedure

Air-Fuel Ratio Measurement

Lead Decontamination Procedure

Stay-in-Grade Oil Analysis Procedure

Crankshaft Rear Seal Conditioning

Report Forms and Data Dictionary

Test Fuel Specification

APPENDIXES

Role of the ASTM Test Monitoring Center and the Calibration Program

Suggested Method for Salvaging Camshaft Bearing Journals

Data Log Sheets

D3343-22

Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D4052-22

Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D4175-23a

Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 12/21/2023).

D4294-21

Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D4485-22e1

Standard Specification for Performance of Active API Service Category Engine Oils (Includes all amendments and changes 12/8/2022).

D1319-20a

Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption (Includes all amendments and changes 9/14/2020).

D86-23ae1

Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).

D130-19

Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D240-19

Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D323-20a

Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) (Includes all amendments and changes 12/9/2020).

D445-23

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D235-22

Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

D3237-22

Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D3231-24

Standard Test Method for Phosphorus in Gasoline

D2700-23b

Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel (Includes all amendments and changes 1/17/2024).

D2699-23b

Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel (Includes all amendments and changes 1/17/2024).

D2422-97(2018)

Standard Classification of Industrial Fluid Lubricants by Viscosity System

D525-12a(2019)

Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) (Includes all amendments and changes 12/12/2019).

D381-22

Standard Test Method for Gum Content in Fuels by Jet Evaporation

J304

Engine Oil Tests

J183

E191-64(1999)e1

Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

D4815-22

Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

D7422-23

Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.