We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
Translate name
STANDARD published on 15.6.2017
Designation standards: ASTM D6980-17
Publication date standards: 15.6.2017
SKU: NS-692738
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
moisture determination, plastics, volatile content,, ICS Number Code 83.080.01 (Plastics in general)
Significance and Use | ||||||||
5.1 This test method is intended for use as a control, acceptance, and assessment test. 5.2 Moisture will affect the processability of some materials. For these materials, defects will occur if they are processed with a moisture content outside of the recommended range. 5.3 The physical properties of some plastics are greatly affected by the moisture content. |
||||||||
1. Scope | ||||||||
1.1 This test method covers the quantitative determination of moisture by means of loss in weight technology down to 50 mg/kg (50 ppm) as it applies to most plastics. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 Specimens tested by this method will be hot, use caution when handling them after testing has been completed. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this
standard.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-09-02 (Number of items: 2 345 509)
© Copyright 2024 NORMSERVIS s.r.o.