ASTM D7033-22

Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

Translate name

STANDARD published on 15.1.2022

Language
Format	PDF - Immediate download - 69.00 USD PDF + redline - Immediate - 82.80 USD Print design - 69.00 USD Print + redline - 82.80 USD
Availability	IN STOCK
Price	69.00 USD excl. VAT
69.00 USD

The information about the standard:

Designation standards: ASTM D7033-22
Publication date standards: 15.1.2022
SKU: NS-1049013
The number of pages: 9
Approximate weight : 27 g (0.06 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Wood-based panels in general

Annotation of standard text ASTM D7033-22 :

Keywords:

ICS Number Code 79.060.01 (Wood-based panels in general)

Additional information

Significance and Use

4.1?The procedures described in this practice are intended to be used to establish design capacity (both strength and stiffness) values based on testing of OSB that, at a minimum, satisfies the relevant performance requirements of PS 2.

4.2?Review and reassessment of values derived from this practice shall be conducted on a periodic basis. If a change is found to be significant, retesting or reevaluation, or both, in accordance with the procedures of this practice shall be considered.

1. Scope

1.1?This practice covers the basis for code recognition of design capacities for OSB structural-use panels. Procedures are provided to establish or re-evaluate design capacities for OSB structural-use panels in flatwise and axial applications. Design capacities for OSB structural-use panels in edgewise applications, such as rim board, are outside the scope of this standard. Procedures for sampling and testing are also provided. Design values stated as capacity per unit dimension are to be regarded as standard. Design capacities developed in accordance with this practice are applicable to panels intended for use in dry in-service conditions.

Note 1:?This practice is based on ICC-ES Acceptance Criteria AC-182. Relative to the scope of AC-182, this practice is limited to OSB panels.

Note 2:?While this practice makes reference to PS 2, this practice applies similarly to products certified to other standards such as CAN/CSA O325.

Note 3:?OSB produced under PS 2 is rated with the Exposure 1 bond classification. Exposure 1 panels covered by PS 2 are intended for dry use applications where the in-service equilibrium moisture content conditions are expected to be less than 16 %. Exposure 1 panels are intended to resist the effects of moisture due to construction delays, or other conditions of similar severity. Guidelines on use of OSB are available from manufacturers and qualified agencies.

Note 4:?PS 2-10 replaced the use of nominal thicknesses with a classification term known as Performance Category, which is defined in PS 2 as A panel designation related to the panel thickness range that is linked to the nominal panel thickness designations used in the International Building Code (IBC) and International Residential Code (IRC). Therefore, the PS 2 Performance Category should be considered equivalent to the term nominal thickness used within this standard.

1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D3501-05a(2018)	Standard Test Methods for Wood-Based Structural Panels in Compression (Includes all amendments and changes 11/20/2018).
D2718-24	Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
D3043-17	Standard Test Methods for Structural Panels in Flexure
D2915-17(2022)	Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
D2719-19	Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness
D5457-23	Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
D9-20	Standard Terminology Relating to Wood and Wood-Based Products
D3500-20	Standard Test Methods for Wood Structural Panels in Tension
D2555-17a(2024)e1	Standard Practice for Establishing Clear Wood Strength Values (Includes all amendments and changes 2/23/2024).
D1990-19	Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D1761-20	Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
D1037-12(2020)	Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
D143-23	Standard Test Methods for Small Clear Specimens of Timber
D6815-22a	Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products (Includes all amendments and changes 11/10/2022).
D4442-20	Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
D4933-16(2021)	Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
D5456-21e1	Standard Specification for Evaluation of Structural Composite Lumber Products (Includes all amendments and changes 6/9/2021).
E4-21	Standard Practices for Force Calibration and Verification of Testing Machines
D5764-23a	Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products (Includes all amendments and changes 4/13/2023).

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.