We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Practice for Indicating Oil in Abrasives
STANDARD published on 1.6.2012
Designation standards: ASTM D7393-07(2012)
Note: WITHDRAWN
Publication date standards: 1.6.2012
SKU: NS-38349
The number of pages: 2
Approximate weight : 6 g (0.01 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
abrasive, contaminants, oil contamination, ICS Number Code 13.040.30 (Workplace atmospheres)
Significance and Use | ||
4.1 Oil in abrasives can be transferred to the surface being cleaned, thus contaminating it. This can cause film defects, affect adhesion of the coating applied over it, and ultimate performance of the coating system. 4.2 Oil in abrasives is one of the cleanliness tests required for mineral and slag abrasives in SSPC-AB1, for recycled ferrous abrasives in SSPC-AB2, and for new ferrous abrasives in SSPC-AB3. 4.3 Other contaminants in abrasive such as chemical contaminants or particulate matter require other methods for detection such as Test Method D4940 for ionic contaminants. The ratio of abrasive to water is different for this test, so the solution from evaluating the oil in abrasive should not be used for Test Method D4940. |
||
1. Scope | ||
1.1 This practice is used to determine the presence of oil in abrasives used for abrasive blast cleaning. 1.2 The procedure can be used in the laboratory, field or fabrication shop. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historical
1.10.2011
Historical
1.4.2014
Historical
15.1.2014
Historical
1.8.2010
Historical
1.11.2012
Historical
1.1.2012
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-11-13 (Number of items: 2 210 764)
© Copyright 2024 NORMSERVIS s.r.o.