We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing (Withdrawn 2002)
STANDARD published on 10.3.2000
Designation standards: ASTM E1261-00
Note: WITHDRAWN
Publication date standards: 10.3.2000
SKU: NS-41058
The number of pages: 13
Approximate weight : 39 g (0.09 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
absorbed dose, calibration facility, dose traceability, dosimeter, dosimetry system, electron beam, gamma ray, ionizing radiation, primary standard dosimeter, quality assurance, radiation processing, reference standard dosimeter, routine dosimeter, transfer standard dosimeter, ICS Number Code 17.240 (Radiation measurements)
1. Scope | ||||||||||||||||||||
1.1 This guide provides the basis for selecting and calibrating dosimetry systems used to measure absorbed dose in gamma-ray or X-ray fields and in electron beams used for radiation processing. It discusses the types of dosimetry systems that may be employed during calibration or on a routine basis as part of quality assurance in commercial radiation processing of products. This guide also discusses interpretation of absorbed dose and briefly outlines the uncertainties associated with the dosimetry measurements. The details of the calibration of the analytical instrumentation are addressed in individual dosimetry system standard practices. 1.2 The absorbed-dose range covered is from about 1 Gy (100 rad) to 1 MGy (100 Mrad). Source energies covered are from 0.1 to 50 MeV photons and electrons. 1.3 Standard practices and guides for specific dosimetry systems and applications are covered in other standards. Dosimetry for radiation processing with neutrons or heavy charged particles is not covered in this guide. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-08-30 (Number of items: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.