We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Practice for Qualification of Radioscopic Systems
STANDARD published on 1.7.2006
Designation standards: ASTM E1411-01(2006)
Note: WITHDRAWN
Publication date standards: 1.7.2006
SKU: NS-41665
The number of pages: 12
Approximate weight : 36 g (0.08 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
Compton back-scattered, contrast manipulation, contrast sensitivity, duplex wire gage, edge sharpening, focal detector distance (FDD), focal object distance (FOD), focal spot size, image processor, image quality indicator, imager, line-pair gage, magnification, near real-time radioscopy, noise reduction, penetrating radiation, programmability, radioscopic, radioscopic examination geometry, raster scan, real-time radioscopy, spatial resolution, static mode, step wedge, transmitted beam
1. Scope | ||||||||||||||||||||||||||
1.1 This practice provides test and measurement details for measuring the performance of X-ray and Gamma ray radioscopic systems. Radioscopic examination applications are diverse. Therefore, system configurations are also diverse and constantly changing as the technology advances. 1.2 This practice is intended as a means of initially qualifying and re-qualifying a radioscopic system for a specified application by determining its performance level when operated in a static mode. System architecture including the means of radioscopic examination record archiving and the method for making the accept/reject decision are also unique system features and their effect upon system performance must be evaluated. 1.3 The general principles, as stated in this practice, apply broadly to transmitted-beam penetrating radiation radioscopy systems. Other radioscopic systems, such as those employing neutrons and Compton back-scattered X-ray imaging techniques, are not covered as they may involve equipment and application details unique to such systems. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For information on safety requirements, refer to the applicable documents listed in Section 2. |
||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-08-26 (Number of items: 2 344 895)
© Copyright 2024 NORMSERVIS s.r.o.