We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Classification of Automated Pavement Condition Survey Equipment
STANDARD published on 1.6.2011
Designation standards: ASTM E1656/E1656M-11
Note: WITHDRAWN
Publication date standards: 1.6.2011
SKU: NS-42538
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
automated, pavement condition survey equipment, traffic speeds, ICS Number Code 93.080.20 (Road construction materials)
Significance and Use | ||
Highway agencies, equipment manufacturers, and other organizations can use this guide to classify the measuring capabilities of pavement condition survey equipment that operates at traffic speeds and collect some of the data useful in characterizing pavement conditions. The vertical measurement resolution, sample interval, and crack width capabilities as specified in Section 5 are subject to user verification. |
||
1. Scope | ||
1.1 This guide covers information for classifying the measurement capability of pavement condition survey equipment or instrumentation that measures longitudinal profile, transverse profile or cracking of pavement surfaces while operating at or near traffic speeds. 1.2 The measuring equipment or instrumentation, addressed by the guide, samples and stores measurement data while operating at or near traffic speeds. 1.3 This guide does not address equipment that operates at traffic speeds but is incapable of measuring profile or individual crack characteristics, such as response-type roughness measuring systems and semi-automated distress recording systems. 1.4 This guide provides measurement criteria and classification for use in a range of applications. 1.5 The measurement criteria apply to longitudinal profile, transverse profile, or the cracking of pavement surfaces. 1.6 This guide does not address the processing of measured data. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historical
1.6.2010
Historical
1.2.2011
Historical
1.12.2013
Historical
15.6.2012
Historical
1.6.2014
Historical
1.12.2008
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-08-18 (Number of items: 2 342 672)
© Copyright 2024 NORMSERVIS s.r.o.