ASTM E1797-12(2017)e1

Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings (Includes all amendments and changes 5/16/2019).

Translate name

STANDARD published on 1.10.2017

Language
Format	PDF - Immediate download - 69.00 USD Print design - 69.00 USD
Availability	IN STOCK
Price	69.00 USD excl. VAT
69.00 USD

The information about the standard:

Designation standards: ASTM E1797-12(2017)e1
Publication date standards: 1.10.2017
SKU: NS-799300
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Paints and varnishes

Annotation of standard text ASTM E1797-12(2017)e1 :

This specification covers minimum material performance requirements and laboratory test procedures for reinforced liquid coating encapsulation products (single- or multiple-coat systems) for leaded paint in buildings. It applies to any liquid-applied product incorporating reinforcement materials as part of the system. Reinforcement materials are continuous fabric or mesh and are applied in the field. These materials are typically applied between a base and top coat. These products are used to encapsulate a leaded paint surface with the intent of reducing human exposure to lead in paint. These are classified into three types which are Type I which are encapsulation products are intended for interior use, Type II which are encapsulation products intended for exterior use, and Type III which defines encapsulation products intended for either interior or exterior use. Different tests shall be conducted in order to determine the following performance properties for reinforced liquid coating encapsulation products such as impact resistance, adhesion, dry abrasion resistance, water vapor transmission, water resistance, chemical resistance, surface burning characteristics, volatile organic compound content, weathering, aging, scrub resistance, mildew resistance, paint ability and repairability. Testing conducted shall be performed on the entire encapsulation product system, whether single or multiple coat, as applied in the field, except for scrub resistance, volatile organic compound (VOC) content, and permeability, which are performed on the top coat only.

Keywords:

abatement, encapsulant, encapsulation, lead, leaded paint, liquid coating, liquid coating encapsulation product, reinforced liquid coating encapsulation product ,, ICS Number Code 87.040 (Paints and varnishes)

Additional information

1. Scope

1.1 This specification covers minimum material performance requirements and laboratory test procedures for reinforced liquid coating encapsulation products (single- or multiple-coat systems) for leaded paint in buildings. Performance properties addressed in this specification are:

1.1.1 Impact Resistance,

1.1.2 Adhesion,

1.1.3 Dry Abrasion Resistance,

1.1.4 Water Vapor Transmission,

1.1.5 Water and Chemical Resistance,

1.1.6 Surface Burning Characteristics,

1.1.7 Volatile Organic Compound (VOC) Content,

1.1.8 Weathering,

1.1.9 Aging,

1.1.10 Scrub Resistance,

1.1.11 Mildew Resistance,

1.1.12 Paintability/Repairability,

1.2 This specification does not address the selection of an encapsulation product for specific use conditions. Specific use conditions may require performance values other than those stated in this specification. See Guide E1796 for guidance.

1.3 This specification complements Specification E1795 for non-reinforced liquid coating encapsulation products.

1.4 This specification does not cover the use of encapsulation products on industrial steel structures nor residential exterior coated metal surfaces because no corrosion control requirements are included.

1.5 This specification applies to any liquid-applied product incorporating reinforcement materials as part of the system. Reinforcement materials are continuous fabric or mesh and are applied in the field. These materials are typically applied between a base and top coat. These products are used to encapsulate a leaded paint surface with the intent of reducing human exposure to lead in paint.

1.6 The results of the test methods included in this specification will not necessarily predict field performance.

1.7 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
E1605-22	Standard Terminology Relating to Lead in Buildings
2012	Preparation of Tin Panels
3011	Condition in Container
E2239-20	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
G154-23	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
D1005-95(2020)	Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D1212-91(2020)	Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1475-13(2020)	Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
D3274-09(2021)	Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D3924-16(2019)	Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
D4541-22	Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D7091-22	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
D823-18(2022)	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D1308-20	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems
D1653-13(2021)	Standard Test Methods for Water Vapor Transmission of Organic Coating Films
D2486-17	Standard Test Methods for Scrub Resistance of Wall Paints
D2794-93(2024)	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
D3273-21	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D3925-02(2022)	Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
D3960-05(2018)	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D3891-23	Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
D4060-19	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4214-23	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4414-95(2020)	Standard Practice for Measurement of Wet Film Thickness by Notch Gages
E1795-20a	Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings (Includes all amendments and changes 12/17/2020).
E1796-20	Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
D16-24	Standard Terminology for Paint, Related Coatings, Materials, and Applications

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.