ASTM E2203-14

Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

STANDARD published on 1.2.2014

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM E2203-14
Note: WITHDRAWN
Publication date standards: 1.2.2014
SKU: NS-44648
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Thermoplastic materials

Annotation of standard text ASTM E2203-14 :

Keywords:

compression, dense, elastomer, elastomeric, gasket, glazing, preformed, seal, setting block, spacers, thermoplastic, thermoplastic vulcanizate (TPV), ICS Number Code 83.080.20 (Thermoplastic materials)

Additional information

1. Scope

1.1 This specification describes products composed of dense thermoplastic elastomers that are fabricated into gaskets and accessories (such as compression seals, setting blocks, spacers, and shims) for use in sealing and glazing applications in building construction. These products are used to seal or serve as components of compression sealing systems between mechanically restrained surfaces in building construction.

1.2 The values stated in metric (SI) units are to be regarded as the standard. The inch-pound values given in parentheses are provided for information purposes only.

1.3 Test Method C1166, as referenced in this specification, should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment that takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

D865-11(2018)	Standard Test Method for Rubber´Deterioration by Heating in Air (Test Tube Enclosure)
D925-14(2019)	Standard Test Methods for Rubber Property´Staining of Surfaces (Contact, Migration, and Diffusion)
D1149-18	Standard Test Methods for Rubber Deterioration´Cracking in an Ozone Controlled Environment
D1566-21a	Standard Terminology Relating to Rubber (Includes all amendments and changes 11/10/2021).
D2137-11(2018)	Standard Test Methods for Rubber Property´Brittleness Point of Flexible Polymers and Coated Fabrics
C717-19	Standard Terminology of Building Seals and Sealants
D3182-21a	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets (Includes all amendments and changes 11/12/2021).
D2000-18	Standard Classification System for Rubber Products in Automotive Applications
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
C864-05(2019)	Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C1087-23	Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1166-21	Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
D395-18	Standard Test Methods for Rubber Property´Compression Set
D412-16(2021)	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D471-16a(2021)	Standard Test Method for Rubber Property—Effect of Liquids (Includes all amendments and changes 6/25/2021).
D573-04(2019)	Standard Test Method for Rubber´Deterioration in an Air Oven
D624-00(2020)	Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D746-20	Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

Similar standards:

ASTM D5499-94(2013)..

Historical
1.7.2013

ASTM D5507-99(2012)..

Historical
10.10.2012

ASTM D5523-10

Historical
1.8.2010

ASTM D5538-13

Historical
1.5.2013

ASTM D5575-07(2013)..

Historical
1.9.2013

ASTM D5576-00(2013)..

Historical
1.4.2013

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.