We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Selection and Operation of Vessel-mounted Camera Systems
Translate name
STANDARD published on 1.4.2018
Designation standards: ASTM F2926-18
Note: WITHDRAWN
Publication date standards: 1.4.2018
SKU: NS-845311
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
mast-mounted sensors, oil spill detection, oil spill remote sensing, ship-mounted sensors,, ICS Number Code 13.020.40 (Pollution, pollution control and conservation),33.160.40 (Video systems)
Significance and Use | ||
3.1 The contributions of an effective vessel-mounted camera system: 3.1.1 Provide a tactical image of the portion of spill in the vicinity of the vessel upon which the system is mounted, 3.1.2 Assist in detection of slicks when they are not observable by persons operating at, or near, the water’s surface or at night, 3.1.3 Provide assistance identifying the area of heaviest oil concentration, 3.1.4 Provide input for the operational deployment of equipment, 3.1.5 Extend the hours of clean-up operations to include darkness and poor visibility, 3.1.6 Locate reported oil-on-water, and 3.1.7 Guidance for operational crews to the slick(s). |
||
1. Scope | ||
1.1 This guide provides information and criteria for the selection of camera remote sensing systems that are vessel-mounted for the detection of oil on water. 1.2 This guide applies to the detection of oil-on-water involving cameras of IR, visible, ultra-violet, or night vision types. 1.3 The context of camera use is addressed to the extent it has a bearing on their selection and utility for certain missions or objectives. 1.4 This guide is generally applicable to all types of crude oils and most petroleum products, under a variety of marine or fresh water situations. 1.5 Many camera technologies exhibit limitations with respect to discriminating between the target substances under certain states of weathering, lighting, wind and sea, or various camera settings. 1.6 In general remote sensing systems are used to detect and delineate the overall slick. Vessel-mounted systems are used only to provide a tactical image in the vicinity of the recovery vessel. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
2. Referenced Documents | ||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-09-05 (Number of items: 2 346 132)
© Copyright 2024 NORMSERVIS s.r.o.