ASTM G115-10(2013)

Standard Guide for Measuring and Reporting Friction Coefficients

STANDARD published on 15.11.2013

Language
Format	PDF - Immediate download - 91.00 USD Print design - 91.00 USD
Availability	IN STOCK
Price	91.00 USD excl. VAT
91.00 USD

The information about the standard:

Designation standards: ASTM G115-10(2013)
Note: WITHDRAWN
Publication date standards: 15.11.2013
SKU: NS-57286
The number of pages: 13
Approximate weight : 39 g (0.09 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Properties of surfaces Mechanical testing

Annotation of standard text ASTM G115-10(2013) :

Keywords:

coefficient of friction, data analysis, friction coefficients, friction/frictional properties, kinetic coefficient of friction, static coefficient of friction, triboelements, ICS Number Code 17.040.20 (Properties of surfaces), 19.060 (Mechanical testing)

Additional information

Significance and Use

5.1 In this guide, factors that shall be considered in conducting a valid test for the determination of the coefficient of friction of a tribosystem are covered, and the use of a standard reporting format for friction data is encouraged.

5.2 The factors that are important for a valid test may not be obvious to non-tribologists, and the friction tests referenced will assist in selecting the apparatus and test technique that is most appropriate to simulate a tribosystem of interest.

5.3 The tribology literature is replete with friction data that cannot readily be used by others because specifics are not presented on the tribosystem that was used to develop the data. The overall goal of this guide is to provide a reporting format that will enable computer databases to be readily established. These databases can be searched for material couples and tribosystems of interest. Their use will significantly reduce the need for each laboratory to do its own testing. Sufficient information on test conditions will be available to determine applicability of the friction data to the engineer's specific needs.

1. Scope

1.1 This guide covers information to assist in the selection of a method for measuring the frictional properties of materials. Requirements for minimum data and a format for presenting these data are suggested. The use of the suggested reporting form will increase the long-term usefulness of the test results within a given laboratory and will facilitate the exchange of test results between laboratories. It is hoped that the use of a uniform reporting format will provide the basis for the preparation of handbooks and computerized databases.

1.2 This guide applies to most solid materials and to most friction measuring techniques and test equipment.

1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D6425-23	Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
G194-08(2018)	Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
C1028-07	Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
D1894-14	Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
D2047-17	Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
D2394-17(2022)	Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
D2534-88(2017)	Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
D2714-94(2019)	Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
D3108-07	Standard Test Method for Coefficient of Friction, Yarn to Solid Material
D4103-17	Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
D4917-97	Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
D4918-97	Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
D5183-21a	Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine (Includes all amendments and changes 1/21/2022).
D3412-07	Standard Test Method for Coefficient of Friction, Yarn to Yarn
D3702-94(2019)	Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
E303-22	Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
E670-09(2020)	Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
E1911-19	Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
E2100-04	Standard Practice for Calculating the International Runway Friction Index
E2101-15(2020)	Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
F609-05(2013):2013/ADJF0609	Adjunct to F609 Test Method for Using a Horizontal Pull Slipmeter (HPS)
F695-01	Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
F732-17	Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
G40-22a	Standard Terminology Relating to Wear and Erosion (Includes all amendments and changes 11/11/2022).
G77-17(2022)	Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
G99-23	Standard Test Method for Wear and Friction Testing with a Pin-on-Disk or Ball-on-Disk Apparatus
G133-22	Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
G137-97(2017)	Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
G143-23	Standard Test Method for Measurement of Web/Roller Friction Characteristics
G163-10	Standard Guide for Digital Data Acquisition in Wear and Friction Measurements (Withdrawn 2016)
E122-17(2022)	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
G164-99(2023)	Standard Test Method for Determination of Surface Lubrication on Flexible Webs
G176-03(2017)	Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test´Cumulative Wear Method
G181-21	Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
G182-13(2018)	Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
C808-75(2021)	Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

Similar standards:

ASTM E2382-04(2012)..

Historical
1.11.2012

ASTM E2386-04(2011)..

Historical
1.10.2011

ASTM E252-06(2013)..

Historical
1.10.2013

ASTM E2666-09

Historical
1.8.2009

ASTM E2835-11

Historical
1.6.2011

ASTM E284-13b

Historical
1.11.2013

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.