We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
Translate name
STANDARD published on 1.3.2023
Designation standards: ASTM G63-15(2023)
Publication date standards: 1.3.2023
SKU: NS-1103746
The number of pages: 27
Approximate weight : 81 g (0.18 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
autogenous ignition temperature, calorimetry, combustion, flammability, friction/rubbing, gaseous fluid impact, heat of combustion, ignition, impact, LOX/GOX compatibility, material evaluation, materials selection, mechanical impact, nonmetallic materials, oxygen index, oxygen service, particle impact, pneumatic impact, promoted ignition/combustion, sensitivity,, ICS Number Code 19.040 (Environmental testing)
Significance and Use | ||||||||||||||||||||||||||||||
4.1?The purpose of this guide is to furnish qualified technical personnel with pertinent information for use in selecting materials for oxygen service in order to minimize the probability of ignition and the risk of explosion or fire. It is not intended as a specification for approving materials for oxygen service. |
||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||
1.1?This guide applies to nonmetallic materials, (hereinafter called materials) under consideration for oxygen or oxygen-enriched fluid service, direct or indirect, as defined below. It is intended for use in selecting materials for applications in connection with the production, storage, transportation, distribution, or use of oxygen. It is concerned primarily with the properties of a material associated with its relative susceptibility to ignition and propagation of combustion; it does not involve mechanical properties, potential toxicity, outgassing, reactions between various materials in the system, functional reliability, or performance characteristics such as physical aging, degradation, abrasion, hardening, or embrittlement, except when these might contribute to an ignition. 1.2?When this document was originally published in 1980, it addressed both metals and nonmetals. Its scope has been narrowed to address only nonmetals and a separate standard Guide G94 has been developed to address metals. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 1:?The American Society for Testing and Materials takes
no position respecting the validity of any evaluation methods
asserted in connection with any item mentioned in this guide. Users
of this guide are expressly advised that determination of the
validity of any such evaluation methods and data and the risk of
use of such evaluation methods and data are entirely their own
responsibility.
Note 2:?In evaluating materials, any mixture with oxygen
exceeding atmospheric concentration at pressures higher than
atmospheric should be evaluated from the hazard point of view for
possible significant increase in material
combustibility.
1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-12-22 (Number of items: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.