Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ČSN EN 12814-4 (056820)
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
Translate name
STANDARD published on 1.10.2018
The information about the standard:
Designation standards: ČSN EN 12814-4
Classification mark: 056820
Catalog number: 505302
Publication date standards: 1.10.2018
SKU: NS-898530
The number of pages: 20
Approximate weight : 60 g (0.13 lbs)
Country: Czech technical standard
Category: Technical standards ČSN
The category - similar standards:
Annotation of standard text ČSN EN 12814-4 (056820):
This document specifies the dimensions, the method of sampling and the preparation of the test specimens, and also the conditions for performing the peel test perpendicular to the weld in order to determine the peel resistance and the failure behaviour. A peel test can be used in conjunction with other tests (e.g. tensile creep, macroscopic examination...) to assess the performance of welded assemblies, made from thermoplastics materials. Peel tests are applicable to overlap welded assemblies made from thermoplastics materials. The T-peel test as defined in Clause 5 will be used only for assessing welded sheet assemblies. This test is not applicable to welded test pieces containing sheets of different nominal thickness. The decohesion test as defined in Clause 6 will be used only for assessing electrofusion joints with nominal thickness of pipe/fitting greater than 10 mm. For socket fusion and for electrofusion socket joints with nominal outside diameter less than or equal to 90 mm, a crush test will be used, as defined in Clause 7. The crush test can also be used for electrofusion joints with outside diameters greater than 90 mm. The crush test for electrofusion saddle joints will be performed in accordance with ISO 13955. NOTE: A decohesion test is also defined in ISO 13954. The tests defined in this standard are not intended to be used for assessment and/or qualification of thermoplastic fittings that already have their own requirements, e.g. polyethylene fittings according to EN 1555-3 and EN 12201-3
These corrections apply to this standard:
ČSN EN 12814-4:2018/Oprava1 (056820)
Correction
Show all technical information.
Zkoušení svarových spojů polotovarů z termoplastů - Část 4: Odlupovací zkouška (Norma k přímému použití jako ČSN).
Correction published on 1.1.2019
Selected format: English - Print design (9.50 USD)
Show all technical information.
Preview of the standard ČSN EN 12814-4 (056820)
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
