We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Automatically translated name:
Passive filter units for electromagnetic interference suppression - Part 3: Standard for passive filters, which are suitable for safety tests (standard for direct use as CSN).
STANDARD published on 1.5.2016
Designation standards: ČSN EN 60939-3
Classification mark: 358281
Catalog number: 99168
Publication date standards: 1.5.2016
SKU: NS-636952
The number of pages: 84
Approximate weight : 283 g (0.62 lbs)
Country: Czech technical standard
Category: Technical standards ČSN
This specification covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources.
Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this specification.
Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this specification. It is up to the manufacturer to state whether a given component is to be designed as a capacitor, an inductor or a filter. Filters can include also other components like resistors and/or varistors or similar components
This specification applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required.
This specification applies to passive filter units, which will be connected to an a.c. mains or other supply (d.c. or a.c.) with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 500 V d.c.
NOTE: For a.c. use, IEC 60384-14 applies to capacitors which will be connected to a.c. mains with a nominal
frequency not exceeding 100 Hz.
This specification covers appliance filters (US) but does not cover facility filters, cordconnected filters or direct plug-in filters. These other filters will be covered by another sectional specification
Pasivní filtry pro elektromagnetické odrušení - Část 3: Norma pro pasivní filtry, pro které jsou vhodné bezpečnostní zkoušky (Norma k přímému použití jako ČSN).
Change published on 1.9.2024
Selected format:Pasivní filtry pro elektromagnetické odrušení - Část 3: Norma pro pasivní filtry, pro které jsou vhodné bezpečnostní zkoušky (Norma k přímému použití jako ČSN).
Correction published on 1.10.2016
Selected format:Pasivní filtry pro elektromagnetické odrušení - Část 3: Norma pro pasivní filtry, pro které jsou vhodné bezpečnostní zkoušky (Norma k přímému použití jako ČSN).
Correction published on 1.12.2018
Selected format:
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-12-19 (Number of items: 2 216 019)
© Copyright 2024 NORMSERVIS s.r.o.