Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ČSN P CEN/TS 16272-7 (736342)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss
Automatically translated name:
Railway applications - Track - Noise barriers and related facilities against air sound propagation - Test method for determining the acoustic performance - Part 7: External characteristics - At the values insertion loss (standard for direct use as CSN).
STANDARD published on 1.4.2016
The information about the standard:
Designation standards: ČSN P CEN/TS 16272-7
Classification mark: 736342
Catalog number: 99162
Publication date standards: 1.4.2016
SKU: NS-634941
The number of pages: 28
Approximate weight : 84 g (0.19 lbs)
Country: Czech technical standard
Category: Technical standards ČSN
The category - similar standards:
Annotation of standard text ČSN P CEN/TS 16272-7 (736342):
purpose of insertion loss measurements is to have an indication of the "efficiency" of the complete installation in attenuating noise from a technical point of view, as is usually done with calculations. The insertion loss is not intended to compare products; in fact, it is site-dependent, so that the same product may give different results when installed on different sites.
In order to be representative, these measurements need to be done in well-defined conditions regarding:
- - the noise source (number and type of trains, speed, etc.);
- - the meteorological window;
- - the measurement time;
- - the reference time, i.e. the time over which the measured insertion loss is evaluated based on the measurement results.
When it is not possible to carry out measurements before the construction of the noise barrier, an "equivalent" site is used for the "before" measurements.
The assessment of insertion loss limiting values is out of the scope of this Technical Specification
