Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60317-0-7-ed.2.0
Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
Translate name
STANDARD published on 16.8.2017
The information about the standard:
Designation standards: IEC 60317-0-7-ed.2.0
Publication date standards: 16.8.2017
SKU: NS-693490
The number of pages: 49
Approximate weight : 147 g (0.32 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60317-0-7-ed.2.0 :
IEC 60317-0-7:2017 establishes general requirements for fully insulated (FIW) zero-defect enamelled round copper wires. The nominal conductor diameter range is given in the relevant technical specification. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - reduction in the number of grades of FIW from 3 through 9 to 4, 6 and 8 only; - reduction of the wire diameter range from (0,040 to 1,000) mm to (0,090 to 0,900) mm for several requirements; - revision of Clause 5 to delete the Table 2 resistance requirements; - revision of Clause 13 to clarify that breakdown is determined when a calculated minimum test voltage is reached, which can be less than 10 000 V; - expansion of Annex A to include requirements for FIW 3, 5, 7 and 9 and for all grades, wire diameters below 0,090 mm and above 0,900 mm. IEC 60317-0-7:2017 etablit les exigences generales relatives aux fils de section circulaire, isoles en continu, en cuivre emaille, sans defaut disolation electrique. La gamme des diametres nominaux des conducteurs est donnee dans la specification technique appropriee. Cette deuxieme edition annule et remplace la premiere edition parue en 2012. Cette edition constitue une revision technique. La presente edition inclut les modifications techniques majeures suivantes par rapport a l’edition precedente: - reduction du nombre de grades FIW compris entre 3 et 9, qui se limitent a 4, 6 et 8 seulement; - reduction de la gamme de diametres des conducteurs, qui passe de (0,040 a 1,000) mm a (0,090 a 0,900) mm pour plusieurs exigences; - revision de l’Article 5 pour supprimer les exigences de resistance du Tableau 2; - revision de l’Article 13 pour preciser que le claquage est determine lorsqu’une tension minimale d’essai calculee est atteinte, qui peut etre inferieure a 10 000 V; - extension de l’Annexe A afin d’integrer des exigences concernant les grades FIW 3, 5, 7 et 9 ainsi que tous les grades dont les diametres de conducteurs sont inferieurs a 0,090 mm et superieurs a 0,900 mm. Mots cles: fils isoles utilises dans les enroulements
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
