Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60603-2-ed.3.0
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
STANDARD published on 22.9.1995
The information about the standard:
Designation standards: IEC 60603-2-ed.3.0
Publication date standards: 22.9.1995
SKU: NS-410775
The number of pages: 153
Approximate weight : 490 g (1.08 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60603-2-ed.3.0 :
IEC 60603-2:1995 applies to groups of related connectors for use with printed boards. They range from connectors with high contact density for low-voltage applications (Styles B and C) to connectors for heavy currents and high voltages having fewer contacts (Styles D, E, F, G and H). It also applies to Style M two-part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting special contacts, for example coaxial, for high voltages or heavy currents (see annex B), as well as 78, 60 or 42 normal contacts identical with those of style C. It applies further to two-part connectors of Styles Q, R, S, T, U and V whose male contacts are fitted to the fixed board connectors and the female contacts to the free board connectors. All these connectors have the same fitting characteristics irrespective of their various utilization characteristics. The part of the connector fitted to the board is provided with terminations suitable for printed boards in accordance with IEC 60326-3 using a grid of 2,54 mm (0,1 in), as defined in IEC 60097. The free board connectors are provided either with solder or flat quick-connect terminations. The fixed board connectors are provided either with solder, insulation displacement, wrapped connections or with screw terminals and flat quick-connect terminations. The terminations of the fixed board connectors are located in such a way as to be suitable for use with mother boards using a grid of 2,54 mm (0,1 in) as defined in IEC 60097 as well as for automating wiring techniques. IEC 60603-2:1995 s'applique a des groupes de connecteurs enfichables utilisables avec des cartes imprimees. Ils vont des connecteurs a haute densite de contacts pour les applications a basse tension (modeles B et C), aux connecteurs pour courants forts et tensions elevees qui comportent moins de contacts (modeles D, E, F, G et H). Elle s'applique egalement aux connecteurs enfichables de modele M, prevus dans des variantes ayant 2, 4 ou 6 cavites qui acceptent des contacts speciaux, par exemple coaxiaux, a haute tension ou a courant fort (voir annexe B), ainsi que 78, 60 ou 42 contacts normaux, identiques a ceux du modele C. Elle s'applique encore a des connecteurs en deux parties des modeles Q, R, S, T, U et V dont les contacts males sont montes sur les embases et les contacts femelles aux fiches. Tous ces connecteurs presentent les memes caracteristiques de montage, independantes de leurs caracteristiques d'utilisation. La partie du connecteur montee sur la carte est munie de sorties adaptees aux cartes imprimees conformes a l'IEC 60326-3 et utilisant une grille de base de 2,54 mm (0,1 in), definie dans l'IEC 60097. Les fiches pour cartes imprimees sont munies de sorties a souder ou de bornes plates a connexion rapide. Les embases pour cartes imprimees sont munies de connexions a souder, de connexions a deplacement d'isolant, de connexions enroulees, ou de bornes a vis et de bornes plates a connexion rapide. Les sorties des embases pour cartes imprimees sont placees de maniere a etre adaptees a une utilisation avec des cartes meres munies d'une grille de 2,54 mm, telle que celle definie dans l'IEC 60097 ainsi qu'aux techniques de cablage automatique.
These changes apply to this standard:
IEC 60603-2-ed.3.0/Amd.1
Change
Show all technical information.
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
(Amendement 1 - Connecteurs pour frequences inferieures a 3 MHz pour utilisation avec cartes imprimees - Partie 2: Specification particuliere pour connecteurs en deux parties pour cartes imprimees, avec assurance de la qualite, pour grilles de base de 2,54 mm (0,1 in) avec caracteristiques de montage communes)
Change published on 18.8.2000
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
