Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 62841-3-10-ed.1.0
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
STANDARD published on 22.9.2015
The information about the standard:
Designation standards: IEC 62841-3-10-ed.1.0
Publication date standards: 22.9.2015
SKU: NS-616250
The number of pages: 28
Approximate weight : 84 g (0.19 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 62841-3-10-ed.1.0 :
IEC 62841-3-10:2015 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: - transportable mitre saws; - transportable tile saws or transportable metal saws. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. This publication is to be read in conjunction with IEC 62841-1:2014. Key words: Hand-held tools, Transportable tools, Cut-off machines The contents of the corrigendum of July 2016 have been included in this copy. IEC 62841-3-10:2015 s’applique aux tronconneuses a disque transportables destinees au decoupage de materiaux tels que les metaux, le beton et la maconnerie, munies d’un disque abrasif du type disque agglomere renforce de Type 41, ou disque a tronconner diamant a rainures peripheriques, le cas echeant, ne depassant pas 10 mm et avec une vitesse assignee a vide ne depassant pas une vitesse peripherique du disque de 100 m/s avec le diametre de disque maximal et une plage de diametres de disque compris entre 250 mm et 410 mm. La presente norme ne s’applique pas aux: scies a onglets transportables, scies a ceramique transportables ou aux scies a metaux transportables. L’attention des Comites Nationaux est attiree sur le fait que les fabricants d’appareils et les organismes d’essai peuvent avoir besoin d’une periode transitoire apres la parution d’une nouvelle publication IEC, ou d’une publication amendee ou revisee, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs equipements aux nouveaux essais ou aux essais revises. Le comite recommande que le contenu de cette publication soit enterine au niveau national au plus tot 36 mois apres la date de publication. La presente Partie 3-10 doit etre utilisee conjointement avec la premiere edition de l’IEC 62841-1:2014. Mots cles: outils portables, outils transportables, tronconneuses a disque transportables Le contenu du corrigendum de juillet 2016 a ete integre dans ce texte.
These changes apply to this standard:
IEC 62841-3-10-ed.1.0/Amd.1
Change
Show all technical information.
Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
(Amendement 1 - Outils electroportatifs a moteur, outils transportables et machines pour jardins et pelouses - Securite - Partie 3-10: Exigences particulieres pour les tronconneuses a disque transportables)
Change published on 4.5.2022
Selected format:Show all technical information.
These corrections apply to this standard:
IEC 62841-3-10-ed.1.0/Cor.1
Correction
Show all technical information.
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
Correction published on 19.7.2016
Selected format:Show all technical information.
Similar standards:
15.7.1990
31.3.1993
11.6.1998
31.7.2001
31.3.1993
31.3.1993
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
