Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 63327-ed.1.0
Automatic floor treatment machines for commercial use - Particular requirements
Translate name
STANDARD published on 4.5.2021
The information about the standard:
Designation standards: IEC 63327-ed.1.0
Publication date standards: 4.5.2021
SKU: NS-1024240
The number of pages: 75
Approximate weight : 225 g (0.50 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 63327-ed.1.0 :
IEC 63327:2021 deals with the safety of powered automatic floor treatment machines intended for commercial use indoors for the following applications: – sweeping, – scrubbing, – wet or dry pick-up, – polishing, – application of wax, sealing products and powder-based detergents, – shampooing of floors. The requirements given by this standard are applied in addition to the requirements for commercial floor treatment machines in IEC 60335-2-72, as far as applicable. For automatic floor treatment machines solely designed for wet or dry pick-up, additional or modified requirements of IEC 60335-2-69 where stated are applicable. Machines covered by this standard can operate in automatic or manual mode. Modified requirements are given in Annex FF of this standard for automatic floor treatment machines not equipped with a manual mode. The automatic floor treatment machines covered by this standard are designed to avoid hazardous contact with persons in the environment applied. It is recognized that automatic floor treatment machines for commercial use might require operation within close proximity to large groups of people, such as in shopping malls and schools. Throughout this standard, the term “machine” is used to refer to an automatic floor treatment machine. The following power systems are covered: – rechargeable batteries that are recharged by built-in battery chargers or off-board battery chargers which may be incorporated within the circuitry of the machine, or mounted on the machine and incorporated within the enclosure of the automatic floor treatment machine; or powered by batteries that need to be removed to be recharged with a charger that is external to the machine, – Other systems are under consideration. This standard does not apply to – vacuum cleaners and water-suction cleaning appliances and automatic battery-operated cleaners for household use (IEC 60335-2-2); – floor treatment machines and wet scrubbing machines for household use (IEC 60335-2-10); – battery chargers (IEC 60335-2-29); – floor treatment machines for commercial use (IEC 60335-2-67); – spray extraction machines for commercial use (IEC 60335-2-68); – road sweepers; – machines designed for use on slopes with a gradient exceeding 20 %; – machines equipped with a power take-off (PTO); – machines designed for use in corrosive or explosive environments (dust, vapour or gas); – machines designed for use in vehicles or on board of ships or aircraft. – vacuum cleaners designed for pickup of combustible dust; – appliances for medical purposes (IEC 60601-1); – driverless industrial trucks and their systems (ISO 3691-4); – robots and robotic devices: Safety requirements of personal care robots (ISO 13482) – machines with parts that extend beyond the contact zone of the machine; – machines designed for picking up liquids with a flash point below 55 °C. LIEC 63327:2021 traite de la securite des machines automatiques de traitement des sols destinees a un usage commercial en interieur pour les applications suivantes: – le balayage, – le brossage, – le ramassage a sec ou en presence deau, – le polissage, – lapplication de cire, de produits detancheite et de detergents a base de poudre, – le nettoyage par shampouineuse des sols. Les exigences donnees dans la presente norme sappliquent en plus des exigences pour les machines de traitement des sols a usage commercial donnees dans lIEC 60335-2-72, pour autant quelles soient applicables. Pour les machines automatiques de traitement des sols concues uniquement pour le ramassage a sec ou en presence deau, les exigences supplementaires ou modifiees comme indique de lIEC 60335-2-69 sont applicables. Les machines couvertes par la presente norme peuvent fonctionner en mode automatique ou en mode manuel. Les exigences modifiees sont indiquees a lAnnexe FF de la presente norme pour les machines automatiques de traitement des sols qui ne disposent pas dun mode manuel. Les machines automatiques de traitement des sols couvertes par la presente norme sont concues de maniere a eviter tout contact dangereux avec des personnes dans lenvironnement dapplication. Il est avere que les machines automatiques de traitement des sols a usage commercial peuvent exiger un fonctionnement a proximite immediate de grands groupes de personnes, notamment dans les centres commerciaux et les ecoles. Tout au long de la presente norme, le terme "machine" est utilise pour designer une machine automatique de traitement des sols. Les systemes dalimentation suivants sont couverts: – batteries rechargeables qui sont rechargees par des chargeurs de batterie integres ou des chargeurs de batterie externes qui peuvent etre integres aux circuits de la machine, ou montes sur la machine et integres a lenceinte de la machine automatique de traitement des sols; ou alimentation par batteries quil est necessaire de retirer pour les recharger a laide dun chargeur externe a la machine; – dautres systemes sont a letude. La presente norme ne sapplique pas – aux aspirateurs et aux appareils de nettoyage a aspiration deau ainsi quaux aspirateurs automatiques alimentes par batteries a usage domestique (IEC 60335-2-2); – aux machines de traitement des sols et aux machines a brosser les sols mouilles a usage domestique (IEC 60335-2-10); – aux chargeurs de batterie (IEC 60335-2-29); – aux machines de traitement des sols a usage commercial (IEC 60335-2-67); – aux machines de nettoyage par pulverisation et aspiration a usage commercial (IEC 60335-2-68); – aux balayeuses de chaussee; – aux machines concues pour etre utilisees sur des surfaces en pente dont linclinaison depasse 20 %; – aux machines equipees dune prise de force; – aux machines destinees a etre utilisees dans des environnements corrosifs ou explosifs (poussiere, vapeur ou gaz); – aux machines destinees a etre utilisees dans des vehicules ou a bord de navires ou davions; – aux aspirateurs destines a aspirer de la poussiere combustible; – aux appareils destine
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
