Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 7148-1:2012-ed.3.0
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals
Automatically translated name:
Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 1: Testing of bearing metals
STANDARD published on 1.10.2012
The information about the standard:
Designation standards: ISO 7148-1:2012-ed.3.0
Publication date standards: 1.10.2012
SKU: NS-434596
The number of pages: 11
Approximate weight : 33 g (0.07 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 7148-1:2012-ed.3.0 :
Description / Abstract: 1 Scope This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication. The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations, thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another. The test results give useful information for practical application only if all parameters of influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
