We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Identification cards - Recording technique - Part 1: Embossing
Translate name
STANDARD published on 7.8.2018
Designation standards: ISO/IEC 7811-1-ed.5.0
Publication date standards: 7.8.2018
SKU: NS-942801
The number of pages: 23
Approximate weight : 69 g (0.15 lbs)
Country: International technical standard
Category: Technical standards ISO
This document is one of a series of International Standards describing the parameters for identification cards as defined in the terms and definitions clause and the use of such cards for international interchange. This document specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human and machine aspects and states minimum requirements. It is the purpose of this document to provide criteria to which cards shall perform. No consideration is given within this document to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria is negotiated between the involved parties. ISO/IEC 10373-1 specifies the test procedures used to check cards against the parameters specified in this document. NOTE 1 Numeric values in the SI and/or Imperial measurement system in this document may have been rounded off and are consistent with, but not exactly equal to each other. Using either system is correct but intermixing or reconverting values can result in errors. The original design was made using the Imperial measurement system. NOTE 2 Tactile Identifier Mark (TIM) defined by ISO/IEC 7811-9 can be located in the name and address area of this document. The layout of embossed characters in this area is not intended to interfere with TIM.
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-09-04 (Number of items: 2 346 114)
© Copyright 2024 NORMSERVIS s.r.o.