We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Automated Crush Strength of Spherical Catalysts
STANDARD published on 29.7.2002
Designation standards: UOP 967-00
Note: WITHDRAWN
Publication date standards: 29.7.2002
SKU: NS-575027
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards UOP
1. Scope |
This method is for determining the crush strength of spherical catalysts using a Chatillon motorized sample stand and force gauge, or tablet hardness tester. The method applies only to spherical particles having a nominal diameter of 1.6-mm (1/16-inch) or larger. The measurement range is from 250 Newtons (N) (56 lbf) down to 1 N (0.22 lbf). Test apparatus other than the Chatillon may be used provided comparable data can be obtained. For statistical purposes, the number of spheres crushed is set at a minimum of fifty; however, more may be specified. Data generated using this method cannot be directly compared to those generated using UOP Method 914. This method will yield higher values for crush strength. Proper comparisons can only be made after tests are run to determine the offset between the two methods. Such offsets are expected to vary from product to product. |
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2025-03-14 (Number of items: 2 232 255)
© Copyright 2025 NORMSERVIS s.r.o.