We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM B233-97(2012)
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
STANDARD published on 15.10.2012
The information about the standard:
Designation standards: ASTM B233-97(2012)
Note: WITHDRAWN
Publication date standards: 15.10.2012
SKU: NS-5856
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM B233-97(2012) :
Keywords:
aluminum, aluminum drawing stock, aluminum wire, drawing stock, wire, ICS Number Code 77.150.10 (Aluminium products)
Additional information
| 1. Scope | ||
|
1.1 This specification covers aluminum 1350 drawing stock 0.375 in. (9.52 mm) to 1.000 in. (25.40 mm) in diameter, in the tempers shown in Table 1, for drawing into wire for electrical conductors (Explanatory Note 1 and Note 2). Temper |
Tensile Strength |
|
|
ksi |
MPa |
|
|
1350-O |
8.5–14.0 |
59–97 |
|
1350-H12 and -H22 |
12.0–17.0 |
83–117 |
|
1350-H14 and -H24 |
15.0–20.0A |
103–138 |
|
1350-H16 and -H26 |
17.0–22.0A |
117–152 |
1.2 The SI values of density and
resistivity are to be regarded as the standard. For all other
properties the inch-pound values are to be regarded as standard and
the SI units may be approximate.
Cookies
Cookie - Settings
Element
Composition, %
Silicon, max
0.10
Iron, max
0.40
Copper, max
0.05
Manganese, max
0.01
Chromium, max
0.01
Zinc, max
0.05
Boron, max
0.05
Gallium, max
0.03
Vanadium plus titanium, total, max
0.02
Other elements, each, max
0.03
Other elements, total, max
0.10
Aluminum, min
99.50
Temper
Resistivity, Ω·
mm 2/m, max
Equivalent Volume
Conductivity,
% IACS, min
1350-O
0.027899
61.8
1350-H12 and -H22
0.028035
61.5
1350-H14 and -H24
0.028080
61.4
1350-H16 and -H26
0.028126
61.3
Material
Volume Conductivity,
% IACS
Resistivity Constants
Volume
Ω·mm 2/m
Ω·cmil/ft
μΩ·in.
μΩ·cm
Copper
100
0.017241
10.371
0.67879
1.7241
Aluminum
61.3
0.028126
16.919
1.1073
2.8126
61.4
0.028080
16.891
1.1055
2.8080
61.5
0.028035
16.864
1.1037
2.8035
61.8
0.027899
16.782
1.0984
2.7899
Specified Diameter, in.
(mm)
Tolerance, in. (mm), Plus or Minus
Deviation of MeanA
Diameter from
Specified Diameter
Deviation at Any
Point from
Specified Diameter
0.375–0.500 (9.52–12.70)
0.501–1.00 (12.73–25.40)
0.020 (0.51)
0.025 (0.64)
0.030 (0.76)
0.035 (0.89)
NBS Handbook 100
Copper Wire Tables
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
Standard Specification for Uniform Test Methods and Frequency
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
Standard Test Method for Resistivity of Electrical Conductor Materials
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-11-22 (Number of items: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.
Cookies
Cookie - Settings
Here you can customize your cookie settings according to your preferences.
We need your consent to use the individual data so that you can see information about your interests, among other things.