Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM D6684-18
Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems
Translate name
STANDARD published on 1.12.2018
The information about the standard:
Designation standards: ASTM D6684-18
Publication date standards: 1.12.2018
SKU: NS-910107
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM D6684-18 :
This specification covers the standard materials composition, physical properties, structural components, manufacturing methods, and testing requirements for articulating concrete block reventment systems for use in erosion protection to underlying soil materials from flowing water forces. Articulating concrete blocks may be produced at a block plant or onsite using either wet-cast or dry-cast production techniques. Reventment cable and fittings shall be designed in such a manner as to provide adequate strength and durability characteristics to facilitate safe lifting and placing of large mattresses. The materials shall consist of aggregates and cementitious materials which shall be Portland, blended, hydrated lime, or pozzolan cements and shall conform to the physical requirements such as compressive strength, water absorption, density or unit weight, and freeze-thaw durability. The system includes a geotextile filter which shall comply to grab strength, sewn seam strength, tear strength, puncture strength, and elongation requirements. Geotextile-subsoil compatibility assessment shall include functional requirements for permeability, particle retention, and resistance to clogging. Physical property requirements for permittivity, aperture size, percent open area, and UV stability shall be based on site-specific soil characteristics, site conditions, and construction techniques.
Keywords:
articulating concrete block (ACB) systems, channel, channel stability, erosion, erosion control, open-channel flow, revetments,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Additional information
| 1. Scope | ||||||||||||||||||||||||||||||||
|
1.1 The purpose of this standard is to provide specifications for articulating concrete block (ACB) revetment system structural components, material composition and physical properties, manufacturing methods and testing requirements. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Reporting or use of units other than inch-pound shall not be regarded as non-conformance with this standard. 1.2.1 The gravitational system of inch-pound units is used when dealing with inch-pound units. In the system, the pound (lbf) represents a unit of force (weight), while the units for mass is slugs. The slug unit is not given, unless dynamic (F = ma) calculations are involved. 1.2.2 The SI units presented for apparatus are substitutions of the inch-pound units, other similar SI units should be acceptable providing they meet the technical requirements established by the inch-pound apparatus. 1.2.3 It is common practice in the engineering/construction profession to concurrently use pounds to represent both a unit of mass (lbm) and of force (lbf). This practice implicitly combines two separate systems of units; the absolute and the gravitational systems. It is scientifically undesirable to combine the use of two separate sets of inch-pound units within a single standard. As stated, this standard includes the gravitational system of inch-pound units and does not use/present the slug unit of mass. However, the use of balances and scales recording pounds of mass (lbm) or recording density in lbm/ft3 shall not be regarded as nonconformance with this standard. 1.2.4 The terms density and unit weight are often used interchangeably. Density is mass per unit volume, whereas unit weight is force per unit volume. In this standard, density is given only in SI units. After the density has been determined, the unit weight is calculated in SI or inch-pound units, or both. 1.2.5 Calculations are done using only one set of units; either SI or gravitational inch-pound. Other units are permissible provided appropriate conversion factors are used to maintain consistency of units throughout the calculations, and similar significant digits or resolution, or both are maintained. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||
|
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
