ASTM E585/E585M-12

Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

STANDARD published on 1.5.2012

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM E585/E585M-12
Note: WITHDRAWN
Publication date standards: 1.5.2012
SKU: NS-47307
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Temperature-measuring instruments

Annotation of standard text ASTM E585/E585M-12 :

Keywords:

sheathed thermocouple material, thermocouple, thermoelement, ICS Number Code 17.200.20 (Temperature-measuring instruments)

Additional information

1. Scope

1.1 This specification establishes requirements for compacted, mineral-insulated, metal-sheathed, base metal thermocouple cable, with at least two thermoelements.

1.2 This specification describes the required material, processing and testing requirements, and also the optional supplementary testing and quality assurance and verification choices.

1.3 The material of construction includes standard base metal thermoelements, austenitic stainless steel or other corrosion resistant sheath material, and either magnesia (MgO) or alumina (Al₂O₃) insulation.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E220-19	Standard Test Method for Calibration of Thermocouples By Comparison Techniques
B516-18	Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
B167-23	Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Seamless Pipe and Tube
A249/A249M-18a(2023)	Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes (Includes all amendments and changes 3/14/2023).
A213/A213M-23	Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
B163-22	Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
A632-19	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A269-13	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
E230-03	Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
ANSI B46.1	Surface Texture Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
E1652-21	Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
E839-23	Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
E780-17(2021)	Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature
E608	Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E344-23	Terminology Relating to Thermometry and Hydrometry
E235-06	Standard Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications

Similar standards:

ASTM E1363-13

Historical
1.4.2013

ASTM E1543-00(2011)..

Historical
1.12.2011

ASTM E1582-14

Historical
1.5.2014

ASTM E1594-11

Historical
1.11.2011

ASTM E1652-14a

Historical
1.5.2014

ASTM E1684-10

Historical
1.11.2010

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.